2336
02-10-2009, 08:17 AM
Folks,
I want to purchase a take-down pin collar kit from the individual mentioned below:
I used Birchwood Casey Tru-Oil (correction; I originally said tung oil and corrected it after seeing another guys post) on mine. I got my stock from CTD and it came without the stock pin retainer tubes so I bought a kit that I found through this forum. It consisted of two Aluminum tubes a screw, nut, and washer that are used to flare the tubes into place in the stock. I bought them for $6.00 from this guy:
Michael S. Langrall
3358 Shearwater Drive
Sacramento, CA 95833
I sent a letter to Mr. Langrall at the address listed but it came back as an incorrect address. Does anyone know Mr. Langrall's username here or his current address? Any help would be appreciated. Thanks folks.
I want to purchase a take-down pin collar kit from the individual mentioned below:
I used Birchwood Casey Tru-Oil (correction; I originally said tung oil and corrected it after seeing another guys post) on mine. I got my stock from CTD and it came without the stock pin retainer tubes so I bought a kit that I found through this forum. It consisted of two Aluminum tubes a screw, nut, and washer that are used to flare the tubes into place in the stock. I bought them for $6.00 from this guy:
Michael S. Langrall
3358 Shearwater Drive
Sacramento, CA 95833
I sent a letter to Mr. Langrall at the address listed but it came back as an incorrect address. Does anyone know Mr. Langrall's username here or his current address? Any help would be appreciated. Thanks folks.