PDA

View Full Version : G3/CETME Flat for sale - squared rails


Blackwing
10-26-2009, 09:33 PM
I was digging through my stack of old tooling and found the proto-type flat that I used for the squaring dies. It has had NO machine work done AT ALL. This means YOU will have to fix all the issues yourself: mag eject area, FCG "ears", rear spacer area, etc. I can't use it because my machine fixture requires machining it BEFORE squaring it.


It has just had the rails squared. They are functional, but not as "pretty". They have a few tooling marks that would probably clean up with a light glass bead blasting. I will sell it for exactly what I bought the flat for $70 plus shipping.

First PM gets it. I will use the time stamp on that.
Blackwing
10-28-2009, 12:08 PM
No interest? :icon_neutral:
Blackwing
11-21-2009, 11:43 PM
No one? This is the same ORF flat you would buy from anywhere else but WITH the rails squared.
Enscribe
11-22-2009, 01:59 AM
!
Blackwing
11-23-2009, 06:10 PM
Yes they are. BUT they do not have the rails squared. This one does.
Blackwing
12-14-2009, 07:09 PM
$70 shipped?
mp_tx
12-30-2009, 09:17 PM
Do you offer a rail squaring service for flats?
rpmfly2
12-30-2009, 10:18 PM
Got pics?
Blackwing
12-31-2009, 12:17 AM
No, to Mp tx. I got burned by someone with a flat that they had tried to square and then tried to hide and then sent to me.

I will give a trade-in discount if the flat is a current orf and will fit in my fixtures. You can get the whole kit for $121.50 shipped if your flat trade-in is good. I mic it out and if its good - deal's on. If not good, I send it back to you and explain why.

This post though, is for the first flat that I squared the rails on when I was building the dies.


Yes to rpmfly2. Pix are here. Post #25 has "ol #1" in the second & bottom of fifth pic.

http://militaryfirearm.com/Forum/showthread.php?t=11391

It has no machine work done, just the squaring. I stated that is not as pretty; that is a personal opinion. I am a perfectionist so if it didn't look "perfect" to me, no one else may even notice.
Blackwing
02-14-2010, 01:51 AM
Now that ORF has auctioned off all there machining cababilities and they have about 30+/- flats left total (according to Kelly) I thought I would Bump this back one more time.
mitchstoner
02-14-2010, 11:28 PM
Blackwing, I'm sending pm about some of the parts you made for the kits you sold.

Thanks.