Noskov
04-14-2010, 04:47 AM
Hello again,
Selling off some stuff I no longer need to fund other purchases. Each item will have a listed description, price + shipping and a photo. Additional photos can be taken if requested. I can usually get back to you with pics within 24hrs unless I'm busy then I will PM you notifying if theres a delay.
Posting here first so no issues with timestamps with other forums. Post an "I'll take it." and it'll be marked SPF to you as we discuss further details. I've sold a couple things here before, but I also have 100% positive feedback on ebay, gunbroker, auctionarms, gunsamerica, HKPro forums, akfiles forums, gunboard forums, thefiringline forums, and Sturmgewehr board.
Payment can be in the form of Postal Money Orders. You can contact me via PM with questions or pic requests.
Click on the thumbnails for fullsize images
1.) Mauser 98K Front Sight Hood: I bought this a while back and supposedly its a genuine example not a repro. I can't be positive on that. Has scratches and dings and surface rust.
$10.00 shipped
http://j.imagehost.org/t/0970/001_5.jpg (http://j.imagehost.org/view/0970/001_5)
2.) Garand Combo Tool?: I had ordered a part from eBay and this was sent instead. I tried to send it back to the seller but he said there was no need to, so I kept it in my desk.
$10.00 shipped
http://j.imagehost.org/t/0298/002_1.jpg (http://j.imagehost.org/view/0298/002_1)
3.) Nazi SA Dagger: I got this from an elderly gentleman who collected some WWII items. It has rust on certain areas of the blade and I believe the inside of the scabbard is rusted as well. The blade might have been sharpened at some point.
SOLD to Junkmanted
http://j.imagehost.org/t/0028/003_5.jpg (http://j.imagehost.org/view/0028/003_5)
http://j.imagehost.org/t/0167/004.jpg (http://j.imagehost.org/view/0167/004)
4.) Lot of hunting gloves: Friend gave me these in a box of other junk as he was moving off island. Only 1 pair seen in the first picture(a left and right), the rest are all single lefts or rights. Not sure on the sizes, maybe small to medium.
$10.00 shipped for the whole lot
http://j.imagehost.org/t/0839/007.jpg (http://j.imagehost.org/view/0839/007)
http://j.imagehost.org/t/0633/008_7.jpg (http://j.imagehost.org/view/0633/008_7)
http://j.imagehost.org/t/0224/009.jpg (http://j.imagehost.org/view/0224/009)
5.) POSP 8x42 Scope: Bought this for my PSL but moving to a different optic platform. Black finish with a rubber eye-cup, extendable sunshade, AA battery adapter. The red bulb used for the illuminated target is dead so it needs to be replaced, Kalinka Optics has them available. It has the PSL/SVD rail mount, this will not fit on an AK/Saiga rail.
Theres something odd about the scope, like a section thats been welded? It doesn't seem to affect anything and may be in relation to the magnification which is done by rotating the rear tube. I'll take pics of the section tomorrow.
SOLD with the rifle
http://j.imagehost.org/t/0320/003.jpg (http://j.imagehost.org/view/0320/003)
6.) Gamo PT80 Air Pistol: Bought a long time ago before I was old enough to buy real firearms. Never put any BB's thorugh it, just liked it for the sound. I'm positive you don't need an FFL for this but some states restrict air guns depending on FPS.
Technical Stuff = Made in Spain, 4.5mm (.177), uses standard CO2 cartridges.
$100.00 shipped
http://j.imagehost.org/t/0659/005.jpg (http://j.imagehost.org/view/0659/005)
7.) Walther Nighthawk Air Pistol: Another plinker I got a long time ago. Again no BB's put through it. Has a rail, red dot and flash light both of which need new batteries and a mock suppressor. I think I have the rest of the stuff for it somewhere, I'll look and include them if I can find it. No FFL needed for this either but again some states have some air gun restrictions for some reason.
Technical stuff = Made in Germany, 4.5mm (.177), uses standard CO2 cartridges loaded into the magazine.
SOLD
http://j.imagehost.org/t/0300/006.jpg (http://j.imagehost.org/view/0300/006)
8.) SAIGA-12 w/ Extras: WITHDRAWN
Going to make it my summer project and convert it myself. :)
9.) PSL Paratrooper: I bought this last year and been considering selling it or trading it off. It has the Confederated Arms synthetic stock set. It's the generation II version that had the pistol grip gap filled unlike the original early stocks. It has a black POSP 8x42 scope. I haven't been able to sight it in. The rifle is marked FPK Dragunov from TNG guns and I purchased it from a collector unfired (he had Tigr's, NDM's, a .308 PSL and this Paratrooper).
I've personally put 40 rounds through the rifle in an attempt to sight it. Now for the catch. The rifle has a ding on it's receiver top cover from the bolt carrier hitting it. This was due to me using Brown Bear 203 grain ammo through it, which is heavy-ball.
If you're wondering why I used heavy-ball ammo it was because it is the only thing available locally I could find. Getting ammo shipped to Hawaii is an amazing headache and extremely costly, not to mention the difficulty in finding a dealer/seller who is willing to ship. I figured a small amount of heavy-ball wouldn't do anything to the rifle but the ding is there. The trunnion is not damaged. Because I cannot find any light-ball ammo in Hawaii for my PSL, I'm listing it here.
Here are the pictures. More available if requested.
SOLD on theakforum.net
OR
OPEN TO TRADES: Same as the Saiga; let me know what you have that you'd be willing to trade. Worst I can say is no.
http://a.imagehost.org/t/0546/011_8.jpg (http://a.imagehost.org/view/0546/011_8)
http://h.imagehost.org/t/0332/008.jpg (http://h.imagehost.org/view/0332/008)
http://a.imagehost.org/t/0068/007-1.jpg (http://a.imagehost.org/view/0068/007-1)
10.) HK SL8/G36 Front & Rear Sights: This came along with the sight rail on the SL8 and I replaced them with something smaller. They will fit onto any picatinny rail. The rear sight is a "paddle" style with a 100 and 300 designation. Made of polymer but are kind of bulky. These don't often appear for sale by themselves; usually they are paired with the rail for a total price of $150 at it's cheapest on HKParts.net. Could probably use them for a project rifle or what not.
$40.00 with free shipping: SOLD on another board.
OR
TRADE: Looking for a black polymer AK buttstock and pistol grip nut. Doing my Saiga conversion so only other stipulation would be the stock has to be US-made.
http://i.imagehost.org/t/0753/004_4.jpg (http://i.imagehost.org/view/0753/004_4)
http://i.imagehost.org/t/0912/005_18.jpg (http://i.imagehost.org/view/0912/005_18)
http://i.imagehost.org/t/0696/006_9.jpg (http://i.imagehost.org/view/0696/006_9)
http://i.imagehost.org/t/0029/008_18.jpg (http://i.imagehost.org/view/0029/008_18)
http://i.imagehost.org/t/0390/009.jpg (http://i.imagehost.org/view/0390/009)
11.) CAI-3 Cast Stainless Steel Receiver: Bought this recently for my first build but it doesn't meet my needs for the project. The rear sight saddle which keeps claw mounts stable was ground off by the original owner and my G3SG1 scope mount won't be able to hold steady. Selling it at a loss so I can get back on track with my build.
SOLD/RETURNED
http://i.imagehost.org/t/0321/003_4.jpg (http://i.imagehost.org/view/0321/003_4)
http://i.imagehost.org/t/0304/004_4.jpg (http://i.imagehost.org/view/0304/004_4)
http://i.imagehost.org/t/0462/005_2.jpg (http://i.imagehost.org/view/0462/005_2)
http://i.imagehost.org/t/0980/006_5.jpg (http://i.imagehost.org/view/0980/006_5)
12.) 10 SKS Spike Bayonets 15": Bought these for a project but doubt I'd start it anytime soon with so many other purchases to make and bills to pay. They're all a little greasy from storage and they're a mix of screws and rivets in terms of mounting hardware.
$45.00 + shipping OR Trade for misc parts. SOLD
http://d.imagehost.org/t/0487/Bayonet.jpg (http://d.imagehost.org/view/0487/Bayonet)
Selling off some stuff I no longer need to fund other purchases. Each item will have a listed description, price + shipping and a photo. Additional photos can be taken if requested. I can usually get back to you with pics within 24hrs unless I'm busy then I will PM you notifying if theres a delay.
Posting here first so no issues with timestamps with other forums. Post an "I'll take it." and it'll be marked SPF to you as we discuss further details. I've sold a couple things here before, but I also have 100% positive feedback on ebay, gunbroker, auctionarms, gunsamerica, HKPro forums, akfiles forums, gunboard forums, thefiringline forums, and Sturmgewehr board.
Payment can be in the form of Postal Money Orders. You can contact me via PM with questions or pic requests.
Click on the thumbnails for fullsize images
1.) Mauser 98K Front Sight Hood: I bought this a while back and supposedly its a genuine example not a repro. I can't be positive on that. Has scratches and dings and surface rust.
$10.00 shipped
http://j.imagehost.org/t/0970/001_5.jpg (http://j.imagehost.org/view/0970/001_5)
2.) Garand Combo Tool?: I had ordered a part from eBay and this was sent instead. I tried to send it back to the seller but he said there was no need to, so I kept it in my desk.
$10.00 shipped
http://j.imagehost.org/t/0298/002_1.jpg (http://j.imagehost.org/view/0298/002_1)
3.) Nazi SA Dagger: I got this from an elderly gentleman who collected some WWII items. It has rust on certain areas of the blade and I believe the inside of the scabbard is rusted as well. The blade might have been sharpened at some point.
SOLD to Junkmanted
http://j.imagehost.org/t/0028/003_5.jpg (http://j.imagehost.org/view/0028/003_5)
http://j.imagehost.org/t/0167/004.jpg (http://j.imagehost.org/view/0167/004)
4.) Lot of hunting gloves: Friend gave me these in a box of other junk as he was moving off island. Only 1 pair seen in the first picture(a left and right), the rest are all single lefts or rights. Not sure on the sizes, maybe small to medium.
$10.00 shipped for the whole lot
http://j.imagehost.org/t/0839/007.jpg (http://j.imagehost.org/view/0839/007)
http://j.imagehost.org/t/0633/008_7.jpg (http://j.imagehost.org/view/0633/008_7)
http://j.imagehost.org/t/0224/009.jpg (http://j.imagehost.org/view/0224/009)
5.) POSP 8x42 Scope: Bought this for my PSL but moving to a different optic platform. Black finish with a rubber eye-cup, extendable sunshade, AA battery adapter. The red bulb used for the illuminated target is dead so it needs to be replaced, Kalinka Optics has them available. It has the PSL/SVD rail mount, this will not fit on an AK/Saiga rail.
Theres something odd about the scope, like a section thats been welded? It doesn't seem to affect anything and may be in relation to the magnification which is done by rotating the rear tube. I'll take pics of the section tomorrow.
SOLD with the rifle
http://j.imagehost.org/t/0320/003.jpg (http://j.imagehost.org/view/0320/003)
6.) Gamo PT80 Air Pistol: Bought a long time ago before I was old enough to buy real firearms. Never put any BB's thorugh it, just liked it for the sound. I'm positive you don't need an FFL for this but some states restrict air guns depending on FPS.
Technical Stuff = Made in Spain, 4.5mm (.177), uses standard CO2 cartridges.
$100.00 shipped
http://j.imagehost.org/t/0659/005.jpg (http://j.imagehost.org/view/0659/005)
7.) Walther Nighthawk Air Pistol: Another plinker I got a long time ago. Again no BB's put through it. Has a rail, red dot and flash light both of which need new batteries and a mock suppressor. I think I have the rest of the stuff for it somewhere, I'll look and include them if I can find it. No FFL needed for this either but again some states have some air gun restrictions for some reason.
Technical stuff = Made in Germany, 4.5mm (.177), uses standard CO2 cartridges loaded into the magazine.
SOLD
http://j.imagehost.org/t/0300/006.jpg (http://j.imagehost.org/view/0300/006)
8.) SAIGA-12 w/ Extras: WITHDRAWN
Going to make it my summer project and convert it myself. :)
9.) PSL Paratrooper: I bought this last year and been considering selling it or trading it off. It has the Confederated Arms synthetic stock set. It's the generation II version that had the pistol grip gap filled unlike the original early stocks. It has a black POSP 8x42 scope. I haven't been able to sight it in. The rifle is marked FPK Dragunov from TNG guns and I purchased it from a collector unfired (he had Tigr's, NDM's, a .308 PSL and this Paratrooper).
I've personally put 40 rounds through the rifle in an attempt to sight it. Now for the catch. The rifle has a ding on it's receiver top cover from the bolt carrier hitting it. This was due to me using Brown Bear 203 grain ammo through it, which is heavy-ball.
If you're wondering why I used heavy-ball ammo it was because it is the only thing available locally I could find. Getting ammo shipped to Hawaii is an amazing headache and extremely costly, not to mention the difficulty in finding a dealer/seller who is willing to ship. I figured a small amount of heavy-ball wouldn't do anything to the rifle but the ding is there. The trunnion is not damaged. Because I cannot find any light-ball ammo in Hawaii for my PSL, I'm listing it here.
Here are the pictures. More available if requested.
SOLD on theakforum.net
OR
OPEN TO TRADES: Same as the Saiga; let me know what you have that you'd be willing to trade. Worst I can say is no.
http://a.imagehost.org/t/0546/011_8.jpg (http://a.imagehost.org/view/0546/011_8)
http://h.imagehost.org/t/0332/008.jpg (http://h.imagehost.org/view/0332/008)
http://a.imagehost.org/t/0068/007-1.jpg (http://a.imagehost.org/view/0068/007-1)
10.) HK SL8/G36 Front & Rear Sights: This came along with the sight rail on the SL8 and I replaced them with something smaller. They will fit onto any picatinny rail. The rear sight is a "paddle" style with a 100 and 300 designation. Made of polymer but are kind of bulky. These don't often appear for sale by themselves; usually they are paired with the rail for a total price of $150 at it's cheapest on HKParts.net. Could probably use them for a project rifle or what not.
$40.00 with free shipping: SOLD on another board.
OR
TRADE: Looking for a black polymer AK buttstock and pistol grip nut. Doing my Saiga conversion so only other stipulation would be the stock has to be US-made.
http://i.imagehost.org/t/0753/004_4.jpg (http://i.imagehost.org/view/0753/004_4)
http://i.imagehost.org/t/0912/005_18.jpg (http://i.imagehost.org/view/0912/005_18)
http://i.imagehost.org/t/0696/006_9.jpg (http://i.imagehost.org/view/0696/006_9)
http://i.imagehost.org/t/0029/008_18.jpg (http://i.imagehost.org/view/0029/008_18)
http://i.imagehost.org/t/0390/009.jpg (http://i.imagehost.org/view/0390/009)
11.) CAI-3 Cast Stainless Steel Receiver: Bought this recently for my first build but it doesn't meet my needs for the project. The rear sight saddle which keeps claw mounts stable was ground off by the original owner and my G3SG1 scope mount won't be able to hold steady. Selling it at a loss so I can get back on track with my build.
SOLD/RETURNED
http://i.imagehost.org/t/0321/003_4.jpg (http://i.imagehost.org/view/0321/003_4)
http://i.imagehost.org/t/0304/004_4.jpg (http://i.imagehost.org/view/0304/004_4)
http://i.imagehost.org/t/0462/005_2.jpg (http://i.imagehost.org/view/0462/005_2)
http://i.imagehost.org/t/0980/006_5.jpg (http://i.imagehost.org/view/0980/006_5)
12.) 10 SKS Spike Bayonets 15": Bought these for a project but doubt I'd start it anytime soon with so many other purchases to make and bills to pay. They're all a little greasy from storage and they're a mix of screws and rivets in terms of mounting hardware.
$45.00 + shipping OR Trade for misc parts. SOLD
http://d.imagehost.org/t/0487/Bayonet.jpg (http://d.imagehost.org/view/0487/Bayonet)