gun picture

[winky]

heres my cetme

[Buelligan]

Nice SOX, the CETME is nice too LOL.

[jlpskydive]

Sweet I would love to find one that works well. I not much of a gun smith, but I am learning.

[jfowl31]

Nice black widow! I'm still mad at you for paying so little!

[Buzz]

Must be the photo, but it looks black to me.

[Grasshopper]

http://www.youtube.com/watch?v=gAmPY-ELCo4&mode=related&search=
The black widows???:eek:

[SteelCore]

Now write COK and get yer COG#! ;)

Oh, and there's muzzle devices you can put on that naked bbl, if you like...the forum has a barrel threading kit you can rent to make it ready for that.

[Buzz]

http://www.youtube.com/watch?v=gAmPY-ELCo4&mode=related&search=
The black widows???:eek:


I was going to ask who first named the rifle "Black Widow", but it was obviously those guys who I believe are the head techs at CAI.

[winky]

its definatly green. maybe with the lack of a flash suppressor we can call it the green lantern

[jfowl31]

whoa, thats supposed to be GREEN? could never have known if you hadnt said so.

Just for grins, you might check out your parts count... typically, the ones with no flash hider were black widows which used their crappy black furniture for US parts.

[winky]

my digital cammera is pretty tired.
whoa, thats supposed to be GREEN? could never have known if you hadnt said so.

Just for grins, you might check out your parts count... typically, the ones with no flash hider were black widows which used their crappy black furniture for US parts.

[AK AJ]

Winky,Dump some US parts in the trigger pack and put some WOOD on that bad boy.
I wanna thank you in advance for taking the picture on that nice tile floor you have, Ms. AJ liked it, and now Mr. AJ has a project for the next few weekends. :whip:
Nice rifle hope you enjoy it!
:icon_biggrin:

AJ

[jfowl31]

If its green furniture, its more than likely foreign, so the parts count could already be ready for wood furniture

[winky]

Im not that conserned about parts counts as where i live in a rural area there is probably not one person that would ever look twice at it. I would though like to find someone who could do a trigger job on it as its borderline terrrible!!
If its green furniture, its more than likely foreign, so the parts count could already be ready for wood furniture

[rustypirate]

Winky,

Whether you care about parts count or not, it IS the law, and we want all our members here to be aware of the law and to follow it explicitly.

[Ransom Stoddard]

I would though like to find someone who could do a trigger job on it as its borderline terrrible!!

Member Bill Springfield:
wspringfield@comcast.net
Trigger work services for most military semi-auto rifles.

Contact Bill to be sure these prices are current >

Trigger work on HK 91, 93, 94, MP-5 PTR-91, all Century, SW-5, 3 and
all other clones. Trigger creep reduced up to 94%+, rough feel is
smoothed out, pull weight reduced to about 4.75lbs from the factory 10 to 12
lbs pull. $39
-->Minimize trigger slack take up and over travel add $15.
-->HK SEF full auto packs converted to semi $40 (or $30 with trigger job).

Cetme.Trigger creep reduced up to 94%+, rough feel is smoothed out,
pull weight reduced to about 5 lbs from the factory 10 to 12 lbs pull.
Sear bar is unitized to the trigger to eliminate trigger slop. $39, option
to reduce trigger over travel add $4.

Cetme/HK, PTR-91, CAI and all clones: Adjust Ejector for more positive
ejection reliability, quite a few of these rifles do no not allow the
ejector to fully ride up inside the bolt head for positive ejection $8.

SKS, Trigger creep reduced up to 90%+, rough feel is smoothed out, pull
weight reduced to about 4.5 lbs. $27.

M1 Garand, M1A/M14, Ruger Mini-14, Trigger pull lighten up to 15%,
rough feel is smoothed out, nice reduction in trigger creep. $28

AR-15, AR-10, all makes, 3.75 to 4lbs pull, very short, smooth clean
break, trigger staging/creep eliminated $29,
2.75 to 3lbs pull add $14 (JP spring set installed).
Remove hammer tail for better ignition add $5.

Robinson XCR, 3.75 to 4lbs pull, very short, smooth clean break,
trigger staging/creep eliminated $45

Armalite AR180b, 3.75 to 4lbs pull, very short, smooth clean break,
trigger staging/creep eliminated $35

AR180, Sterling, Howa, Costa Mesa sheet metal receiver models: 5lbs,
clean break, no creep. $35

Daewoo .223 all models, 3.75 to 4lbs pull, very short, smooth clean
break, $35

FAL all models, 4.5 to 5lbs pull, very short, smooth, clean break, over
travel significantly reduced $29

Ruger 10/22 2.75 to 3lbs pull, very short, smooth, clean break, $19

Marlin Camp, 4lbs pull, very short, smooth clean break, $35

[winky]

thanks for the contact info i just emailed him about the cetme and my new hbar match target. That thing is actually worse then the cetme. I shot 300 rounds out of it today and my fingertip is numb!!

[Ransom Stoddard]

You are welcome.
MANY members here will confirm the fact that
one of Bill's trigger jobs is the BEST, well spent money
that anyone can put toward their CETME.

[winky]

thanks for the contact info i just emailed him about the cetme and my new hbar match target. That thing is actually worse then the cetme. I shot 300 rounds out of it today and my fingertip is numb!!

[winky]

my cetme trigger group and the new ar15 parts are boxed up and going out to him in the morning. thanks again for the help!!