PDA

View Full Version : official G3 tools from Bundeswehr



Perro Del Diablo
07-31-2010, 11:35 PM
was fooling around in the shop today and had the tool kit out for something else and figured i would take pics of the tools since i had the kit out anyway

the complete set
http://i578.photobucket.com/albums/ss229/accuracybyvolume/g3%20tools/1.jpg

The chamber scrubbing brush, the bore brush, and the patch eyelet for the cleaning rods
http://i578.photobucket.com/albums/ss229/accuracybyvolume/g3%20tools/2.jpg

chamber and bore brush, eyelet, and 2 cleaning rods
http://i578.photobucket.com/albums/ss229/accuracybyvolume/g3%20tools/3.jpg

action proving dummy rounds
http://i578.photobucket.com/albums/ss229/accuracybyvolume/g3%20tools/4.jpg

the feeler gauge set for checking bolt gap
http://i578.photobucket.com/albums/ss229/accuracybyvolume/g3%20tools/5.jpg

a dust brush
http://i578.photobucket.com/albums/ss229/accuracybyvolume/g3%20tools/6.jpg

rear sight adjustment tool
http://i578.photobucket.com/albums/ss229/accuracybyvolume/g3%20tools/7.jpg

bore scope - the brass piece on the left turning green is adjustable for focus, and the plastic 90 degrees elbow shaped piece on the right is a 90 degrees mirror or periscope
http://i578.photobucket.com/albums/ss229/accuracybyvolume/g3%20tools/8.jpg

assembled together
http://i578.photobucket.com/albums/ss229/accuracybyvolume/g3%20tools/9.jpg

receiver, and cocking tube straightening mandrels with rod
http://i578.photobucket.com/albums/ss229/accuracybyvolume/g3%20tools/10.jpg

steel broken shell extractor
http://i578.photobucket.com/albums/ss229/accuracybyvolume/g3%20tools/11.jpg

hydraulic grease nipple that screws onto the end of the barrel to pump the bore full of fluid to remove stuck bullets, patches, and cleaning kit chains
http://i578.photobucket.com/albums/ss229/accuracybyvolume/g3%20tools/12.jpg

view of the grease nipple from the other side
http://i578.photobucket.com/albums/ss229/accuracybyvolume/g3%20tools/13.jpg

triple front frame straigtening tool - this style requires you to remove the front sight blade so you dont damage it
http://i578.photobucket.com/albums/ss229/accuracybyvolume/g3%20tools/14.jpg
http://i578.photobucket.com/albums/ss229/accuracybyvolume/g3%20tools/15.jpg

spring installation tool
http://i578.photobucket.com/albums/ss229/accuracybyvolume/g3%20tools/16.jpg

bore gauge with red protective cover
http://i578.photobucket.com/albums/ss229/accuracybyvolume/g3%20tools/17.jpg

depth markings for g3
http://i578.photobucket.com/albums/ss229/accuracybyvolume/g3%20tools/18.jpg

no go plug gauge with markings for the Mg1 (mg42 in .308)
http://i578.photobucket.com/albums/ss229/accuracybyvolume/g3%20tools/19.jpg

markings for the G1 FN FAL
http://i578.photobucket.com/albums/ss229/accuracybyvolume/g3%20tools/20.jpg

7.62guy
08-01-2010, 08:04 AM
that is a very nice kit and collection of tools. i don't think i have ever seen one as complete and well cared for.

hypotenuse1
08-01-2010, 09:11 AM
Very Nice! I always like having the extras for my military guns-----Now I have something I can hunt for.