PDA

View Full Version : Advice on using a blank firing device.



Buddymack
08-01-2010, 06:36 PM
Does anyone here know how to use a blank firing device such as the ones from RTG? I just got one in..:icon_neutral:

M1 Tanker
08-02-2010, 04:52 PM
Remove the flash hider from your HK91/G3 or clone, install the BFA, insert blank :)

bladeworks123
08-02-2010, 07:50 PM
And depending on the power of the blanks you are using, the screw on the side opens and closes the gas port on the BFA to make it somewhat adjustable. If you are going to use the DAG plastic blanks, affectionately referred to as "tampon blanks":roflmao::lolgreen:, by somebody we know:rolleyes:,,,,I keep my BFA completely closed on those.... some of the higher powered brass blanks, you may want to open it up some.

Buddymack
08-03-2010, 02:17 AM
Well I have never taken my flash hider off, are those stuck pretty good or are they like the AK's?

M1 Tanker
08-03-2010, 05:18 AM
What type of rifle is it buddymack? I don't think those will fit a cetme, but I could be wrong.

Buddymack
08-03-2010, 06:29 AM
It is for a CETME, I am pretty sure according to the RTG site it is supposed to fit...I hope it does it would be a great way to test for function.

bladeworks123
08-03-2010, 08:06 PM
Your Century gun could have a pinned on flash supressor. That's the first thing you need to figure out, if it is pinned or not, and whether they left the threads on it.... Take a couple of pics and measure the length from the triple frame forward. The pin is generally on the bottom of the flash hiders.