Multitasker Tube review

[Optimus Prime]

Tossed this up at the blog (http://gunscoffee.blogspot.com/2010/10/multitasker-tube.html), thought you guys might like to see it too. All pics should be hotlinked to bigger sized ones.


I was introduced to the Multitasker line of AR15 specific tools (http://www.multitaskertools.com/) a couple months back on the Weapons Evolution (http://www.weaponevolution.com/forum/showthread.php?2453-Multitasker-AR15-Multi-Tools) forum. The one that really caught my eye, especially having just cleaned my carbine, was the Multitasker Tube (http://www.brownells.com/.aspx/pid=40885/Product/MULTITASKER_TUBE_TOOL). Well lucky for me, Shane, the man behind the magic, hooked me up with a sample Tube and the expansion pack/case.

First off, the main tool is sweet, but the expansion kit is like the mercury icing on Murderface's birthday cake (http://www.youtube.com/watch?v=u85wVlFBBW8) (well, not quite as toxic anyway.) The kit consists of a semi-hard case and spare bits for the driver portion of the Tube.

http://1.bp.blogspot.com/_p2CS3e4PGsM/TK8q4MDaVPI/AAAAAAAAAuI/9jyfOOomo4M/s400/case.jpg (http://1.bp.blogspot.com/_p2CS3e4PGsM/TK8q4MDaVPI/AAAAAAAAAuI/9jyfOOomo4M/s1600/case.jpg)

The inside of the case has elastic loops for the Tube itself, and a couple slots for the pick and whatever else you want to stick in there. The other side has a couple mesh dividers and a velcro retention strap for the extra bits whatever you want to stick in that side as well.

http://4.bp.blogspot.com/_p2CS3e4PGsM/TK8rkWJpjUI/AAAAAAAAAuM/5_wGFei5RRg/s400/open_case.jpg (http://4.bp.blogspot.com/_p2CS3e4PGsM/TK8rkWJpjUI/AAAAAAAAAuM/5_wGFei5RRg/s1600/open_case.jpg)
As you can see, everything fits inside quite nicely, and doesn't bounce around. I carried the whole kit in my day pack over the weekend through the LandNav course, and it was silent. No rattles or clunks.

As mentioned, the expansion kit includes a range of spare bits in a rubber holder. The bits include a #1 Phillips; a 3/32 and #5 Flathead; a T-10 and a T-15 Torx bit; and 3/16, 9d/64, 1/8, 7/64, and 3/32 Hex drivers. That should cover most of your bases in the AR15 world of field maintainence.

http://3.bp.blogspot.com/_p2CS3e4PGsM/TK8tnimJRrI/AAAAAAAAAuQ/7iYWQo92nLg/s400/out.jpg (http://3.bp.blogspot.com/_p2CS3e4PGsM/TK8tnimJRrI/AAAAAAAAAuQ/7iYWQo92nLg/s1600/out.jpg)

Cool stuff.

Now on to the Tube tool itself.

Multitasker is a fitting name for the company, seeing as they produce a full range of weapon specific multi-tools, and the Tube is no exception. Being similar in size to a marker, it still packs some nice features. The cap unscrews to reveal the magnetic socket for the driver bits, and the tube comes with an AR15 front sight tool (four pronged A2 type.)

http://4.bp.blogspot.com/_p2CS3e4PGsM/TK8uwjPuH9I/AAAAAAAAAuU/eZsM928R-Wg/s400/cap_sight_tool.jpg (http://4.bp.blogspot.com/_p2CS3e4PGsM/TK8uwjPuH9I/AAAAAAAAAuU/eZsM928R-Wg/s1600/cap_sight_tool.jpg)

The inclusion of a front sight tool is one of the reasons I thought this tool was a winner right out the gate. Anybody who's spent more than a week in the Army can remember numerous zero ranges with a handful of finishing nails scattered about for front sight adjustment. I still don't understand the Army's refusal to issue front sight tools.

Making the sight tool a separate bit was a genius move on Multitasker's part, as the prongs are somewhat fragile, so the bit is easily replaceable. The cap also has a little nub sticking out of the top, which is perfect for stubborn takedown pins, and the pocket clip pulls double duty as a flathead screwdriver.

The other end features a threaded peg that accepts the included dental pick and AR15 bolt scraper.

http://1.bp.blogspot.com/_p2CS3e4PGsM/TK8wQ4VwOTI/AAAAAAAAAuY/ijNhnhCAuKY/s400/scraper.jpg (http://1.bp.blogspot.com/_p2CS3e4PGsM/TK8wQ4VwOTI/AAAAAAAAAuY/ijNhnhCAuKY/s1600/scraper.jpg)

http://3.bp.blogspot.com/_p2CS3e4PGsM/TK8wcHuRB2I/AAAAAAAAAuc/UMs6b1meTSM/s400/pick.jpg (http://3.bp.blogspot.com/_p2CS3e4PGsM/TK8wcHuRB2I/AAAAAAAAAuc/UMs6b1meTSM/s1600/pick.jpg)

The pick is great for getting into those tight spots, as well as for those of you who have problems getting out the firing pin retaining pin. Just hook the little sucker and pop it right out.

The scraper was the biggest reason I was attracted to the Tube. Anybody who's cleaned an AR after a couple hundred rounds of rapid-ish fire is familiar with the baked on layer of crud that will accumulate on the bolt tail right behind the O-rings (you know that criticism of the AR for crapping where it eats? Well that's the diner plate.) The blade of the scraper is cut to match the contours of the bolt tail, and is the best way I've ever had of scraping that crap off.

Here's the bolt from my A2 clone. That's at least 500 rounds of crap that's had about a year to settle on there.

http://2.bp.blogspot.com/_p2CS3e4PGsM/TK8yPOMSDVI/AAAAAAAAAug/Wr8GmvDTAbA/s400/scraping.jpg (http://2.bp.blogspot.com/_p2CS3e4PGsM/TK8yPOMSDVI/AAAAAAAAAug/Wr8GmvDTAbA/s1600/scraping.jpg)

I didn't soak it or anything, just scraped away for about 30 seconds. Some Hoppes and cloth will take care of whatever's left no problem.

The threading on that end of the Tube is also the same as the threading on the Otis cleaning kits that the Army issues now, meaning you can use the tube as a handle for the pull-through. I don't have an Otis kit handy, but I'll probably pick one up in the near future to try out in conjunction with the Tube. (Toss the pull through in that big empty pocket on the top of the above case, a little bottle of CLP, and you should be good.)

If you're the type who regularly shoots an AR, especially if you're like me and put 100+ rounds through in a regular range session, the Multitasker Tube is well worth looking into, even the basic tube alone. The Tube and expansion kit is available from Brownell's (http://www.brownells.com/.aspx/pid=40885/Product/MULTITASKER_TUBE_TOOL).

[Optimus Prime]

A little update and additions (http://gunscoffee.blogspot.com/2010/12/multitasker-tube-update.html) (again, click pics for full size goodness)-



I got one a few months back, and wrote it up here (http://gunscoffee.blogspot.com/2010/10/multitasker-tube.html). It's still rocking, and since then I've added a few things to the case, so I thought I'd toss up some pictures and mention what's what.

I picked up an Otis M16/M4 cleaning kit (http://www.amazon.com/Otis-Soft-Pack-Cleaning-System/dp/B001AT3SWW?ie=UTF8&tag=gunsan-20&link_code=btl&camp=213689&creative=392969) recently, and tossed a couple items into the Tube's case, making for a decent "quick problem solver" sort of kit. I think I'm pretty well covered for most issues I've run into with using dirty dirty Wolf and the like.

http://1.bp.blogspot.com/_p2CS3e4PGsM/TQGZdjssmzI/AAAAAAAAAwc/AApNG2ApPQw/s320/Tube_Plus.jpg (http://1.bp.blogspot.com/_p2CS3e4PGsM/TQGZdjssmzI/AAAAAAAAAwc/AApNG2ApPQw/s1600/Tube_Plus.jpg)
http://3.bp.blogspot.com/_p2CS3e4PGsM/TQGaS3fq8qI/AAAAAAAAAwg/GYYDkYD-JXM/s320/Load_Out.jpg
(http://3.bp.blogspot.com/_p2CS3e4PGsM/TQGaS3fq8qI/AAAAAAAAAwg/GYYDkYD-JXM/s1600/Load_Out.jpg)
I added the short cable and bore brush from the Otis kit, along with a little bottle of CLP. Between this and the Boresnake (http://www.amazon.com/24011-cal-Centerfire-Rimfire-5-56mm/dp/B0000C50K3?ie=UTF8&tag=gunsan-20&link_code=btl&camp=213689&creative=392969) that lives in my ACS stock, I feel pretty well covered (I do need to grab the broken shell extractor out of my range bag and toss it in here now that I think of it...)

I've run into the problem of a stubborn chamber on the range before. Thankfully a squirt of CLP and a run through with a Boresnake took care of things, but having a dedicated chamber brush makes me feel better. The Tube is threaded to be compatible with Otis components, and makes a great handle for the short cable and chamber brush.

http://3.bp.blogspot.com/_p2CS3e4PGsM/TQGbVidnmXI/AAAAAAAAAwk/E7G6jK6YwKc/s320/Bore_Brush.jpg (http://3.bp.blogspot.com/_p2CS3e4PGsM/TQGbVidnmXI/AAAAAAAAAwk/E7G6jK6YwKc/s1600/Bore_Brush.jpg)

Just lock the bolt back, insert the brush through the ejection port, and give it a few turns. Follow it up with a pass or two from the Snake, and it's good to go.

Multitasker (http://www.brownells.com/.aspx/pid=40883/Product/AR_15_M16_MULTITASKER_TOOLS)'s full line is well worth checking out, and the Multitasker Tube (http://www.brownells.com/.aspx/pid=40885/Product/MULTITASKER_TUBE_TOOL) still remains a great addition to your range bag or SHTF kit, or whatever you keep your AR stuff in.

Oh, I'll be reviewing another one of their offerings pretty soon too, as soon as I get a chance to try and break it. Here's a teaser shot though. Serendipity, thy name is Multitasker.

http://1.bp.blogspot.com/_p2CS3e4PGsM/TQGeITjKbLI/AAAAAAAAAwo/JfcD2sm_yZI/s320/Ultralight%2526Beer.jpg (http://1.bp.blogspot.com/_p2CS3e4PGsM/TQGeITjKbLI/AAAAAAAAAwo/JfcD2sm_yZI/s1600/Ultralight%2526Beer.jpg)

[Optimus Prime]

Another piece of Multitasker Gear I reviewed (http://gunscoffee.blogspot.com/2010/12/multitasker-ultralight-review.html). Again, pics hot-linked to bigger ones.



http://2.bp.blogspot.com/_p2CS3e4PGsM/TROfUecqtJI/AAAAAAAAAxw/TH1AcFjQtec/s400/Title_Slide.jpg (http://2.bp.blogspot.com/_p2CS3e4PGsM/TROfUecqtJI/AAAAAAAAAxw/TH1AcFjQtec/s1600/Title_Slide.jpg)

http://1.bp.blogspot.com/_p2CS3e4PGsM/TROihV8pCRI/AAAAAAAAAx8/L1SIcDEb190/s400/Ultralight.jpg (http://1.bp.blogspot.com/_p2CS3e4PGsM/TROihV8pCRI/AAAAAAAAAx8/L1SIcDEb190/s1600/Ultralight.jpg)

I have previously discussed the fantastic Multitasker Tube, which is a great field tool for some basic AR needs. Multitasker liked what I had to say, and sent out a sample of their Ultralight multitool for me to look over and beat up.

The Ultralight arrives in a tasteful box, simple and utilitarian, much like the tool itself. The minimalist packaging design also avoids detracting from the contents itself, leaving the tool as the main show. Inside the box is an instruction sheet and the Ultralight tool inside of its nylon case.

http://2.bp.blogspot.com/_p2CS3e4PGsM/TROhHbh5FuI/AAAAAAAAAx0/jHVv5tlj5V4/s400/Unboxing.jpg (http://2.bp.blogspot.com/_p2CS3e4PGsM/TROhHbh5FuI/AAAAAAAAAx0/jHVv5tlj5V4/s1600/Unboxing.jpg)

The case is Molle compatible and closes with a solid push-the-dot snap. Inside is an elastic divider to separate the tool and the spare driver bits.

http://2.bp.blogspot.com/_p2CS3e4PGsM/TROh3Pb7tmI/AAAAAAAAAx4/SRru2eUJRCo/s400/Uncasing.jpg (http://2.bp.blogspot.com/_p2CS3e4PGsM/TROh3Pb7tmI/AAAAAAAAAx4/SRru2eUJRCo/s1600/Uncasing.jpg)

The tool itself shows Multitasker's usual attention to detail, all the components are cleanly machined, and rotate smoothly out of the handle. The handle wears G10 grip scales, a highly durable fiberglass resin laminate. All tools lock open when in use as well, either by a liner lock system, or traditional spine lock. The back of the tool also has a very sturdy pocket clip with a built in lanyard loop.

Speaking of tools, here's the full spread-

http://1.bp.blogspot.com/_p2CS3e4PGsM/TROjjO7RO2I/AAAAAAAAAyA/B2SIP-nGYFw/s400/full_spread.jpg (http://1.bp.blogspot.com/_p2CS3e4PGsM/TROjjO7RO2I/AAAAAAAAAyA/B2SIP-nGYFw/s1600/full_spread.jpg)

From left to right, Castle-nut Spanner/flat screwdriver, bit driver with A2 front sight tool, dental pick on Otis compatible thread, and contoured bolt scraper.

The bolt scraper is what initially attracted me to the Multitasker line of tools, as I am of the scraping persuasion when it comes to cleaning my AR systems. I hate cleaning, and kind of like to see how far I can push it, so all that carbon crud gets plenty of time to bake on to the bolt tail nice and thick. The bolt scraper is precisely machined to match the radius of an AR15 bolt, making it much easier to scrape as much off as possible.

http://2.bp.blogspot.com/_p2CS3e4PGsM/TROkzSbg1gI/AAAAAAAAAyE/aJutQICuJJc/s400/scraping.jpg (http://2.bp.blogspot.com/_p2CS3e4PGsM/TROkzSbg1gI/AAAAAAAAAyE/aJutQICuJJc/s1600/scraping.jpg)
Ignore the beat up and ugly fingers...

It really takes no time to scrape off almost all of the baked on carbon, leaving just a small amount to be wiped of with some Hoppes or your preferred cleaning solution.

The bend in the scraper also makes it usable as a "bolt override tool" if you run into a nasty case-over-bolt or double feed.

The dental pick is a handy cleaning and take-down tool, just the thing to get into some of those small corners. Some people have difficulty plucking the firing pin retaining pin out of the bolt carrier, and the pick makes it a breeze-

http://1.bp.blogspot.com/_p2CS3e4PGsM/TROl1tm40iI/AAAAAAAAAyI/mHOkUyKOBOE/s400/hook.jpg (http://1.bp.blogspot.com/_p2CS3e4PGsM/TROl1tm40iI/AAAAAAAAAyI/mHOkUyKOBOE/s1600/hook.jpg)

The pick is also threaded on with an Otis compatible thread just like the Tube, making the Ultralight a great handle for stubborn patches and the like if using an Otis pull through kit (like the Army is issuing these days.)

http://3.bp.blogspot.com/_p2CS3e4PGsM/TROmZPSbS6I/AAAAAAAAAyM/2NGjIHWAhhk/s400/Unscrewed.jpg (http://3.bp.blogspot.com/_p2CS3e4PGsM/TROmZPSbS6I/AAAAAAAAAyM/2NGjIHWAhhk/s1600/Unscrewed.jpg)

The bit driver is also a welcome feature. An A2 front sight tool rides here, and there are 10 included driver bits of various sizes and types. They are all standard 1/4" bits, so the user can swap out any other specialty bits they need. The spare bits all ride in a rubber bit holder that snuggles down in it's own part of the case.

http://2.bp.blogspot.com/_p2CS3e4PGsM/TROnjmbSn0I/AAAAAAAAAyQ/Mo9zI8ZGoZ8/s400/bit_driver.jpg (http://2.bp.blogspot.com/_p2CS3e4PGsM/TROnjmbSn0I/AAAAAAAAAyQ/Mo9zI8ZGoZ8/s1600/bit_driver.jpg)

Between the driver and the spanner, there are few field repairs the Ultralight can't handle.

http://2.bp.blogspot.com/_p2CS3e4PGsM/TROpPeRzMoI/AAAAAAAAAyU/3UVOjAFiEx8/s400/montage.jpg (http://2.bp.blogspot.com/_p2CS3e4PGsM/TROpPeRzMoI/AAAAAAAAAyU/3UVOjAFiEx8/s1600/montage.jpg)

The Ultralight is now an indispensable part of my range kit. Since my carbine is also a test platform for various AR things, I run my castle nut unstaked to make it simpler to swap parts out, so having a spanner wrench on hand is a great idea. Plus the front sight tool alone is something so few people tend to have handy.

And of course, it can be utilized as an improvised tactical beverage entry tool for those post-range gatherings and weekend gunsmithing sessions.

http://1.bp.blogspot.com/_p2CS3e4PGsM/TQGeITjKbLI/AAAAAAAAAwo/JfcD2sm_yZI/s400/Ultralight%2526Beer.jpg (http://1.bp.blogspot.com/_p2CS3e4PGsM/TQGeITjKbLI/AAAAAAAAAwo/JfcD2sm_yZI/s1600/Ultralight%2526Beer.jpg)
I just love the photo too much to not use it again...

The Multitasker Ultralight is a fantastic pocket AR toolbox, and worth thinking about for any serious AR shooter. You can pick on up through Brownell's (http://www.brownells.com/1/1/49190-ar-15-m16-multitasker-tools-ultralight-multitasker-tool-brownells.html)and AR15.com.

I've got a Series 2 Multitasker as well that I'm currently beating up and will be reviewing soon. Let me know if you've got any thoughts about these products so far, I'm more than willing to pass them along to the designer as well.

[slim]

thank you sir, may we have another?

[drine]

That would make a great stocking stuffer for those of you who haven't got my Christmas bought...........:icon_neutral:

I had to check. $39.99 is a decent price for it.

[Optimus Prime]

thank you sir, may we have another?

The flagship Series 2 is coming soon to a blog review near you! :wink:

You're right about the stocking stuffer, even Gear Scout (http://militarytimes.com/blogs/gearscout/2010/12/17/gearscouts-gift-guide-2010/) thinks it's a great gift idea.

I do appreciate the comments guys, they're what keeps me in the blog game.

[Optimus Prime]

As before, pictures should link to bigger ones.


Multitasker Series 2 AR (http://gunscoffee.blogspot.com/2011/01/multitasker-series-2-ar.html)

http://4.bp.blogspot.com/_p2CS3e4PGsM/TS94UzW_dsI/AAAAAAAAA0s/OSc7HhBGlP8/s400/Better_Title_Slide.jpg (http://4.bp.blogspot.com/_p2CS3e4PGsM/TS94UzW_dsI/AAAAAAAAA0s/OSc7HhBGlP8/s1600/Better_Title_Slide.jpg)

I have previously shown you guys the Multitasker Tube (http://gunscoffee.blogspot.com/2010/10/multitasker-tube.html) and Ultralight (http://gunscoffee.blogspot.com/2010/12/multitasker-ultralight-review.html) AR specific multi-tools, and Shane was kind enough to provide an example of his Series 2 AR Multi-tool. The Series 2 is, in so many words, the king of the Multitasker line. It encompasses all of the Tube's and Ultralight's abilities, and tosses a few extras into the mix.

http://1.bp.blogspot.com/_p2CS3e4PGsM/TS95_TpeEVI/AAAAAAAAA0w/0EpnDVf5MZ4/s400/Tools.jpg (http://1.bp.blogspot.com/_p2CS3e4PGsM/TS95_TpeEVI/AAAAAAAAA0w/0EpnDVf5MZ4/s1600/Tools.jpg)

The Series 2 opens in the same way as most popular multi-tools (Such as Leatherman, SOG, or Victorinox) and most of the tools have multiple uses. As with the Ultralight, the Series 2 uses G10 for the grip panels. For those who don't know, G10 is a high strength fiberglass material that is highly temperature and corrosion resistant, and can be textured to provide extra purchase. Currently the Series 2 is only available with black panels, but other colors are in the works.

The first tool that most users will notice are the pliers, most importantly, the jaws.

http://4.bp.blogspot.com/_p2CS3e4PGsM/TS98QYdf1AI/AAAAAAAAA00/lmZJgYP14WA/s400/Jaws.jpg (http://4.bp.blogspot.com/_p2CS3e4PGsM/TS98QYdf1AI/AAAAAAAAA00/lmZJgYP14WA/s1600/Jaws.jpg)

Unlike most multi-tools, Multitasker does not use cast metal in their construction, but rather CNC cut billet D2 tool steel. The jaws are also Tuffride coated for corrosion resistance. The jaws also feature a twin roller bearing, rather than a simple press fit. The machining also gives the jaws a precision fit. If you expand the above image you can see the teeth actually inter-mesh, providing grip on even the thinnest materials. There is also no cut out section like on most other multi-tool pliers, as this would further compromise the jaw strength. The jaws do have a set of wire cutters built in to them, and the overall strength of the steel allows for cutting some pretty tough stuff.

What does all this mean? Simply that the Series 2 has the smoothest feeling, and strongest pliers on the market.

All tools on the Series 2 are machine cut, either by CNC or wire EDM. The locking tanto-style 2.5" blade is cut from 440C Stainless Steel, with all other tools cut from 420 Stainless, and all being Tuffride coated for extra corrosion resistance. The blade incorporates a liner lock, however the lock is situated opposite of most liner lock knives (if you're a righty, you'll have to pull the lock, rather than push,) and can seem a bit awkward at first. Word is that will be fixed on the next generation Multitasker though. The blade was nice and sharp from the factory though, which is always nice.

The file, while being about as useful as any multi-tool file I've used (which is "meh" at best) is more of an excuse to include a large flat tip screwdriver. The bit driver is magnetic and takes standard 1/4" drive bits, and 10 common sized bits are included, along with the standard Multitasker AR front sight adjustment bit. The dental pick is threaded the same as Otis cleaning kit components, allowing you to use the tool as a handle, just like the other Multitasker tools. There is also a 3/8" wrench for adjusting LaRue optics mount tension.

The carbon scraper, another Multitasker innovation, is simply fantastic for getting the stubborn baked on carbon off your bolt and carrier components. However it has also been discovered the bent tip shape of the tool makes it usable as a "bolt override device" in the event of a case-over-bolt malfunction.

http://4.bp.blogspot.com/_p2CS3e4PGsM/TS-BhSf1K-I/AAAAAAAAA04/pmm1cMFAS2c/s400/Case_Over_Bolt.jpg (http://4.bp.blogspot.com/_p2CS3e4PGsM/TS-BhSf1K-I/AAAAAAAAA04/pmm1cMFAS2c/s1600/Case_Over_Bolt.jpg)
A case becomes wedged between the carrier and charging handle,
preventing the user from using the charging handle to retract the bolt
and clear the malfunction.

http://3.bp.blogspot.com/_p2CS3e4PGsM/TS-CFyqGRMI/AAAAAAAAA08/4k9ZtEIun5w/s400/Pull.jpg (http://3.bp.blogspot.com/_p2CS3e4PGsM/TS-CFyqGRMI/AAAAAAAAA08/4k9ZtEIun5w/s1600/Pull.jpg)
The scraper can be used to pull back on the carrier...

http://4.bp.blogspot.com/_p2CS3e4PGsM/TS-CZ-lzK7I/AAAAAAAAA1A/TBJTyBJhD8U/s400/Lock.jpg (http://4.bp.blogspot.com/_p2CS3e4PGsM/TS-CZ-lzK7I/AAAAAAAAA1A/TBJTyBJhD8U/s1600/Lock.jpg)
...allowing the user to lock the bolt to the rear and clear the malfunction.
(yeah, didn't wash my hands after the gun show...)

While I have never encountered this particular malfunction, I have heard of them, and it's nice to know I can fix it quickly if it ever does.

The stock wrench is also a great piece of insurance, especially for those of us who don't stake the castle nut. It is cut to match the contours of the nut, and while not intended to properly torque one down, it does allow you to keep it in check in the field or at the range. A dedicated wrench is still suggested if you're building rifles.

http://3.bp.blogspot.com/_p2CS3e4PGsM/TS-EEeAOhGI/AAAAAAAAA1E/6IzekbwIiMw/s400/Spanner.jpg (http://3.bp.blogspot.com/_p2CS3e4PGsM/TS-EEeAOhGI/AAAAAAAAA1E/6IzekbwIiMw/s1600/Spanner.jpg)

Of course keeping in the multi-use theme, the stock wrench does make for a decent tactical beverage entry tool.

http://1.bp.blogspot.com/_p2CS3e4PGsM/TS-RBfTgX4I/AAAAAAAAA1M/_78uHgj_EfU/s400/TBET.jpg (http://1.bp.blogspot.com/_p2CS3e4PGsM/TS-RBfTgX4I/AAAAAAAAA1M/_78uHgj_EfU/s1600/TBET.jpg)

The tool ships in a simple cardboard box like the Ultralight does, and includes a MOLLE compatible black nylon sheath that holds the tool and spare bit holder.

http://1.bp.blogspot.com/_p2CS3e4PGsM/TS-T1NwN_vI/AAAAAAAAA1Q/0-TzkV9xomc/s320/Case.jpg (http://1.bp.blogspot.com/_p2CS3e4PGsM/TS-T1NwN_vI/AAAAAAAAA1Q/0-TzkV9xomc/s1600/Case.jpg)

The tool also has a lanyard hole in one of the grips in case you're one of those clumsy people who need to dummy chord everything to yourself.

Overall, the Series 2 is an impressive piece. It's not intended as an EDC style mulit-tool, but a mission specific AR maintenance toolkit in a small package. If you are a serious AR weapon system user, be it military, LEO, or competitive shooter, the entire Multitasker line is well worth taking a look at.