HK SG1 Stocks for $179.95 @ NUMRICH!!!!

[The Great 308]

I was searching Numrich today and found this!!!!......

28954


HECKLER & KOCH
G3, 91 SGI SNIPER RIFLE

This rare, factory original stock features an adjustable cheekpiece that raisesup and down and locks in place via screws. The black plastic stock includes thebackplate assembly and buttplate. Fits models SG1, G3, 91, and PTR-91.Condition is used, good to very good. Quantities are limited.
Stock w/ Adjustable Cheekpiece, Black Plastic, Used Goodto VG
Product No. 1365250
$179.95
This item requires an extra shipping cost of $1.00


This is a very good deal guys these come with heavy HK 2 stage buffers which cost $150 by themselves. The cheapest I have seen one of these stocks for the past several years was $300 I paid $350 for mine a couple of years ago. I called NUMRICH and they said they have a hundred of these in stock. I really doubt if they will last long once the guys on HKpro find out about it. This is the perfect answer for both reduced recoil and improved cheek weld with a scope on a G3 clone or Cetme. :rockon: :sniper:

http://www.gunpartscorp.com/catalog/Detail.aspx?pid=1365250&catid=9034

[7.62guy]

this is a very good deal. i have one already but at this price i see one being ordered soon, like tonite or tomorrow at the latest. thanks for the heads up. this is just one of the great things about this forum. the great exchange of info. i go to their site now and then but most likely it would not have been in time for this. again thanks. R.D.

[bladeworks123]

You're hired !! Or as my kids say,,,Good lookin' out.

[The Great 308]

I wanted to update everyone if you read the quotes and the link posted below you will see that these particular SG1 stocks only have the standard buffer. I am sorry for any confussion that my post may have caused.


From your recent comment I see you didn't order one. I contacted Numrich and they said only a standard buffer is included. if this employee is right, it's not a good deal:



Got my two stocks today. They did have standard buffers. Condition is good and useable, but they will not win any beauty contests. The screws for the cheek piece are very tight, so have them soaking in some oil. Metal looks fine. All in all, I am content.
http://i7.photobucket.com/albums/y280/kcowherd/DSCF1319.jpg


Thanks for the update and the photos SigKev.
I was not aware that HK produced a G3 SG1 stock with a standard buffer and my comments in my original post were based on the fact that I own a SG1 stock and I thought all of them other than the HK33 SG1 stock had heavy buffers.
Andrew I just want you and everyone else to know I did not intend to misrepresent anything or mislead anyone it just looked like a really great deal that I thought I would pass along. I still think it is a good deal but I agree that without the heavy buffer it is not a great deal.
I checked the link last night and saw that these are sold out for now.

http://www.hkpro.com/forum/index.php

[Otis61]

I ordered one just for the buffer. Wish I had called numrich first.

[7.62guy]

i was lucky. i called first and then had to pass.