muzzle break.

[oldman]

I have question about the muzzle break. If I take the muzzle break off will there be threads there to put a flash supressor on. Thanks the Oldman:America:

[hulygan]

it depends, if the rifle has a pressed on, or screwed on comp. when was it made and by whom? any pics to go along with this?

[SSwee]

On CETME,
It's not 100% for sure positively without a doubt gonna have threads but the odds are in your favor. Unless the barrel has been shortened. If it's a standard barrel, the MB is screwed on, pinned at 6:00 o'clock, welded over the pin, and maybe high temp soldered. Plenty of posts on the subject.
SS

[M1 Tanker]

Pictures of the barrel where it enters the muzzle brake and an overall picture would clear up this question quickly.

[drine]

Did Century cut in front of or behind them? If you see the barrel taper bigger at the end then the threads are probably there. I'm asking a rhetorical question here.
Yes, Pics would get you an instant answer.