ammo can opener?

[BIG 54R]

this may be the right spot, I need a cpl of ammo can openers bcuz I don't have any. I bought some czech siler tip from a vendor at a show and he said it was in the crate he thought but it wasn't but show is to far to go back at that time. Anyone have a cpl for sale or another solution (I was thinking maybe a p-38 might work but grudgingly so...ouch!!!);)

[SSwee]

The P38 making you work too hard for your bullets?
SS

[Big Steve]

I never have any luck with the can openers. I use a wide wood chisel and a hammer. Put the flat side toward the outside edge of the can and angle the chisel back from the direction you want to go. Tap your way around, reseting the chisel each time before you drive it all the way in.
Steve

[tump]

i have 1 if you want it pm me your address ill send it out tomorrow.:D

[gunluvver]

Use a grinder or disc sander.Just grind down the upper edge of the fold just enough to be able to pop the lid out. The can and lid can actually be reused by adding a handle to the lid. It can be resealed by using epoxy or another sealer.

[Planning]

this may be the right spot, I need a cpl of ammo can openers bcuz I don't have any. I bought some czech siler tip from a vendor at a show and he said it was in the crate he thought but it wasn't but show is to far to go back at that time. Anyone have a cpl for sale or another solution (I was thinking maybe a p-38 might work but grudgingly so...ouch!!!);)
big,
when you come to see me, bring the ammo cans to open and i will show you how the can opener works and then i will give you a can opener.
capt ron ( planning)

[BIG 54R]

Thanx guy's cap'n you have an PM. Yeah that p-38 /can opener from academy aint to easy to do!

[M1 Tanker]

Big54r, that is where you break out the bayonet :)

[Optimus Prime]

Big54r, that is where you break out the bayonet :)

I knew somebody would say it... :D

[BIG 54R]

speaking of bayo's can the cetme bayo be sharpened real good and used as a camp knife/hunting knife? I heard they where pretty good so was just wondering, also what's a good way to sharpen them?

[nevada]

I used a cetme bayo and hammer to open a spam can of ammo. The bayo never gave it a second thought, worked great. Actualy easier than the supplied can opener.

[SteelCore]

The paratech Pry-axe and a hammer. the Chisel/hammer combo is quick too.

The Pry Axe:
http://www.usedrescuetools.com/images/garagesale/paratechpryaxecutting12042002.jpg

[DAA1]

speaking of bayo's can the cetme bayo be sharpened real good and used as a camp knife/hunting knife? I heard they where pretty good so was just wondering, also what's a good way to sharpen them?
Depends on how bad the blade is, mill file if it's really dull, then steel or stone it for a final touch up. Not the highest quality of steel, but not bad for the price.

Next gun show I am going to try and sell a few as ammo can openers...