SigfanUSAF
08-22-2007, 07:55 AM
Still in need of some receivers, I'm in the Charlotte area of North Carolina for a FTF or ship.
dieselboy_1980@yahoo.com
OK guys, I know someone likes to trade......
I am in need of two things:
Pre 1916 Gew 98 receiver, barreled receiver, or sporter (mostly need an unmolested Gew receiver)
Post 1940 Kar98K receiver or barreled receiver. I assembled all the parts sans receiver, and I'm not particular as to which code, as all the parts I have are mismatched.
So, here's what I've got to trade:
Steyr M95 carbine: TRADE PENDING!!!!!
CIA import, blueing about 95% as refinished. Numbers on bolt, barrel, receiver, and stock all match. Stock coated with something somewhat high gloss, though tastefully done (it's doesn't appear to be a varnish, probably just a high gloss application of BLO). If it wasn't arsenal refinished whoever did it did a fine job. Front sight is staked in place. Excellent shooter, very good rifling in a somewhat dark bore. 8x56r. I do have 50-75 rounds of Nazi proofed ammo with several (7 or clips as well.
I don't really want to sell this one, I would prefer to trade. 3 day inspection period, with a full refund minus shipping so long as rifle is returned in same condition. Must go to 01 or 03 FFL.
http://i132.photobucket.com/albums/q9/SigfanUSAF/m95-1.jpg
http://i132.photobucket.com/albums/q9/SigfanUSAF/m95-2.jpg
http://i132.photobucket.com/albums/q9/SigfanUSAF/m95-3.jpg
I also have a pile of '03/'03A3 parts: -3 R marked 03A3 followers
-3 03A3 follower springs
-3 R marked triggers
-2 R marked sears2 sear springs
-1 trigger pin
-3 R marked ejectors
-2 ejector pins
-2 striker springs
-2 striker collars
-1 03A3 rear sight, complete
-1 1903 rear sight windage knob assy
-1 G marked front sight hood
-1 1903 front sight and base, marked 2
-7 butt swivel/ small buttplate screws
-1 large buttplate screw
-1 1903 upper band screw
-1 03A3 upper band screw
-2 R marked mag cutoff levers
-1 RP marked 03A3 butt swivel
-1 1903 butt swivel
-2 pairs of trigger guard screws (and 1 more short one)
-3 safety levers
-1 R1 stripped bolt body
-1 R marked extractor
-1 03A3 large bow trigger guard
-1 National Ordnance '03A3 stripped receiver, drilled and tapped for the Redfield Jr scope mount (no mount included)
Adding this all up from GunParstCorps website yeilds over$260, not counting the NatOrd receiver (which ain't worth much).
Will sell all for $225 shipped and insured priority to an 01 FFL or for $200 without the receiver to anyone in the US, or trade. 3 day inspection period, with a full refund minus shipping so long as all parts are returned in same condition.
http://i132.photobucket.com/albums/q9/SigfanUSAF/03a3lot.jpg
Next up, BAYONETS!!!
Top, USGI M1905 10", fo rthe M1, 03, and 03A3, AFH 1942, cut-down to 10" by Union Fork and Hoe, overall very good, with scabbord
Left, USGI M6 for the M14 rifle, Milpar, DOD proof, good condition, with M8A1 sheath
Middle, USGI M5A1 for the Garand, Imperial, DOD proof, good condition, with M8A1 sheath
Right, USGI M4 for the M1 Carbine, BrenDan, good condition, with unreinforced M8A1 sheath
http://i132.photobucket.com/albums/q9/SigfanUSAF/Bayos.jpg
And the Steyr ammo:
84 rounds of 1938 German 8x56R ammo, 12 clips, 4 boxes (marked '39). This is the remainder of 250 rounds I bought, 0 FTFs, a lot of sore shoulder.
http://i132.photobucket.com/albums/q9/SigfanUSAF/ammo.jpg
I will post more as I find and photograph it. Thanks for looking!
dieselboy_1980@yahoo.com
OK guys, I know someone likes to trade......
I am in need of two things:
Pre 1916 Gew 98 receiver, barreled receiver, or sporter (mostly need an unmolested Gew receiver)
Post 1940 Kar98K receiver or barreled receiver. I assembled all the parts sans receiver, and I'm not particular as to which code, as all the parts I have are mismatched.
So, here's what I've got to trade:
Steyr M95 carbine: TRADE PENDING!!!!!
CIA import, blueing about 95% as refinished. Numbers on bolt, barrel, receiver, and stock all match. Stock coated with something somewhat high gloss, though tastefully done (it's doesn't appear to be a varnish, probably just a high gloss application of BLO). If it wasn't arsenal refinished whoever did it did a fine job. Front sight is staked in place. Excellent shooter, very good rifling in a somewhat dark bore. 8x56r. I do have 50-75 rounds of Nazi proofed ammo with several (7 or clips as well.
I don't really want to sell this one, I would prefer to trade. 3 day inspection period, with a full refund minus shipping so long as rifle is returned in same condition. Must go to 01 or 03 FFL.
http://i132.photobucket.com/albums/q9/SigfanUSAF/m95-1.jpg
http://i132.photobucket.com/albums/q9/SigfanUSAF/m95-2.jpg
http://i132.photobucket.com/albums/q9/SigfanUSAF/m95-3.jpg
I also have a pile of '03/'03A3 parts: -3 R marked 03A3 followers
-3 03A3 follower springs
-3 R marked triggers
-2 R marked sears2 sear springs
-1 trigger pin
-3 R marked ejectors
-2 ejector pins
-2 striker springs
-2 striker collars
-1 03A3 rear sight, complete
-1 1903 rear sight windage knob assy
-1 G marked front sight hood
-1 1903 front sight and base, marked 2
-7 butt swivel/ small buttplate screws
-1 large buttplate screw
-1 1903 upper band screw
-1 03A3 upper band screw
-2 R marked mag cutoff levers
-1 RP marked 03A3 butt swivel
-1 1903 butt swivel
-2 pairs of trigger guard screws (and 1 more short one)
-3 safety levers
-1 R1 stripped bolt body
-1 R marked extractor
-1 03A3 large bow trigger guard
-1 National Ordnance '03A3 stripped receiver, drilled and tapped for the Redfield Jr scope mount (no mount included)
Adding this all up from GunParstCorps website yeilds over$260, not counting the NatOrd receiver (which ain't worth much).
Will sell all for $225 shipped and insured priority to an 01 FFL or for $200 without the receiver to anyone in the US, or trade. 3 day inspection period, with a full refund minus shipping so long as all parts are returned in same condition.
http://i132.photobucket.com/albums/q9/SigfanUSAF/03a3lot.jpg
Next up, BAYONETS!!!
Top, USGI M1905 10", fo rthe M1, 03, and 03A3, AFH 1942, cut-down to 10" by Union Fork and Hoe, overall very good, with scabbord
Left, USGI M6 for the M14 rifle, Milpar, DOD proof, good condition, with M8A1 sheath
Middle, USGI M5A1 for the Garand, Imperial, DOD proof, good condition, with M8A1 sheath
Right, USGI M4 for the M1 Carbine, BrenDan, good condition, with unreinforced M8A1 sheath
http://i132.photobucket.com/albums/q9/SigfanUSAF/Bayos.jpg
And the Steyr ammo:
84 rounds of 1938 German 8x56R ammo, 12 clips, 4 boxes (marked '39). This is the remainder of 250 rounds I bought, 0 FTFs, a lot of sore shoulder.
http://i132.photobucket.com/albums/q9/SigfanUSAF/ammo.jpg
I will post more as I find and photograph it. Thanks for looking!