PDA

View Full Version : Cetme L Drawings



okeejoe
11-08-2016, 07:29 AM
Does anyone have any schematics, drawings, pictures, of the original front weldment on the Cetme L Rifle? I know that they are selling weldments for this rifle for SA. I would like to know how it was set up in its original form for FA. I find a lot of stuff online about this rifle, but it seems to be limited on the break down of it.

scottz63
11-08-2016, 09:11 AM
Does anyone have any schematics, drawings, pictures, of the original front weldment on the Cetme L Rifle? I know that they are selling weldments for this rifle for SA. I would like to know how it was set up in its original form for FA. I find a lot of stuff online about this rifle, but it seems to be limited on the break down of it.

Here is a pretty good thread from another forum on Cetme-L builds with some drawings and pics.

http://www.weaponeer.net/forum/forum_posts.asp?TID=22248&PN=1

okeejoe
11-08-2016, 02:20 PM
Here is a pretty good thread from another forum on Cetme-L builds with some drawings and pics.

http://www.weaponeer.net/forum/forum_posts.asp?TID=22248&PN=1

Thank you scottz63, I went over there and read that post, but it's basically the same old stuff I've been reading, I did like the one idea about using a hk33 flat and bending it square one top instead of round, which is one of the ideas I've had. Little by little people are going to make progress with this rifle build.