my newest addition (MN snipers)

[kevin]

these are my newest addition

all ex snipers, one still had the holes open

Top is 43 izzy has 44 dated scope,
middle has a 43 izzy scope on izzy rifle
bottom has 44 SVT scope (recalibrated for MN) on 44 izzy

ive got one more im working on but the base is giving me trouble

[Planning]

way to go kevin, those look very nice..........

[kevin]

they all have the crosshair about 2 ft to the right, but im hoping grinding on the mount feet will help? This was just matching the iron sights to the crosshairs. That laminate really photographed light, i think from the flash, its really a nice darker color

ive got a PE and PEM im working on now as well. The PEM is a side mount. PE is a top hex mount

[hunter_la5]

those are some fine looking snipers!

maybe the irons are off a bit too? my m91/30 irons were about a foot or so off at 100yds before i adjusted them.

now they're an inch or two off, unfortunately the hammer-and-punch method doesn't lend itself to tight adjustments. I remember seeing sight tools for them a few years back but now I can't find any.

[turbothis]

those are some nice snipers.:icon_biggrin:

[Old Jimmy]

Beautiful rifles !!!!

Old Jimmy

[Woodman in MO]

http://i35.photobucket.com/albums/d175/erotictophat/borat_nice.jpg

[popo]

I used a file on the scope base....very little at a time though ,to bring it in line with the sights. Good Luck!:thumbup:

[kevin]

how much could i expect to get by filing, some of my rifles are about 2 ft off at 100yd peering through the bore and aiming with irons. I know i can grind some but i dont want to start grinding and find i cant take any more off! I ground one actuall base and that seemed to help. Didnt have to grind the mount itself that way