Ak 47 Parts Kit

[captred1968]

Hi Who Are Selling Ak Parts Kit With Matching Numbers At A Good Price?

[mdm2]

apex had some real nice early romy kits it seems after 1986 alot of them where crapy

[Lon Moer]

Apex (https://www.apexgunparts.com/index.php/cPath/51?osCsid=66c1f8dc4da4493ee7860ad92e5818ef) has matching number Romy kits from the '70s and the '80s.
Cope's (http://www.copesdistributing.net/index.php?cPath=49&osCsid=28a66b0847d4cb4e76acc31cb6f79f0a) also has some for the same price.

[pelos]

i actually recently bought a AK romy "G" parts kits and i was truly amazed at its immaculate condition, the barrel is chrome lined and it doesn't even look as if it has has one round through it, I RECOMMEND BUYING FROM COPE'S :rockon::rockon::2pistol::2pistol:

[brewskzilla]

A buddy of mine just built two Romies... One with and one without the handguard penis. They're both sweet shooters. Not much trouble to build, either.

[nowhereman]

A buddy of mine just built two Romies... One with and one without the handguard penis. They're both sweet shooters. Not much trouble to build, either.
Handguard penis:roflmao:

[captred1968]

THANKS TO ALL.:thumbup:

[KMURPHY]

Handguard penis:roflmao:

It is called a donkey dick thank you......

[SSwee]

It is called a donkey dick thank you......

That's what they use to call the summer sausage we ate years ago. Why are they putting summer sausage on an AK?

lol
SS

[vladimir]

Apex (https://www.apexgunparts.com/index.php/cPath/51?osCsid=66c1f8dc4da4493ee7860ad92e5818ef) has matching number Romy kits from the '70s and the '80s.
Cope's (http://www.copesdistributing.net/index.php?cPath=49&osCsid=28a66b0847d4cb4e76acc31cb6f79f0a) also has some for the same price.
I just ordered a kit from apex . A 1970's kit and asked Him to double check for matching numbers in the comments section of their order form . I was told the topcover may not match . So I wonder what is considered a matching kit then???

[vladimir]

Dont get me wrong guys .I have delt with Apex before and he runs an excellent outfit there . But I beleive if the topcover does not match then the kit is infact non matching . I can care less about the spring guide ,hammer ,trigger . . But infact a mismatched topcover would just ruin the whole aspect of building from matching number kits for me and destroy any resail value to a kit built rifle . Whats your thoughts guys???

[KMURPHY]

this is true. When I bought my Polish Underfolder, i was sold a "matching kit", and I got a matching kit...EVERYTHING matches. Trigger parts, gas, tube, selector switch, everything with #'s matches. WIth a topcover that does not match, I do not consider to match. But that is JMO.

[GearHD]

CFS has some for $89.

[k98k792]

I would not consider it matching unless all parts match. Yea,I'd send it back.

[eldogg]

CFS has some for $89.


you better read the whole line.

These are the last of our Romanian parts. They were exposed to salt water during transit; because of this some of the wood may be dried out and cracked. The bores are chrome-lined and are still bright and shiny, however the external parts have varying levels of "protective coating" rust. We have separated our parts into 2 grades - Grade B's will have a light rusty protective coating; Grade C's will have a heavy rusty protective coating
what the hell is a heavy rusty "protective" coating?:eek:

[KMURPHY]

I was under the impression that rust is a form of corrosion and oxidation, not a protectant. I believe it is reffered to as bubba parkerization

[SSwee]

Heavy rust is the scale rust with deep pits to hold the gun oil.
SS

[ELEFANTMKVI (The Inbred clown)]

I was thinking of getting 1 or 2 just for spare parts. But there was a review of these rusted kits on another forum with pictures. They ranged from GOOD to Garbage. I would stay away.Any one that thinks "RUST" is a protective coating isn't playing with a full deck.:eek:You would be better off paying a few extra dollars for a decent kit.

[Smokehouse69]

I was thinking of getting 1 or 2 just for spare parts. But there was a review of these rusted kits on another forum with pictures. They ranged from GOOD to Garbage. I would stay away.Any one that thinks "RUST" is a protective coating isn't playing with a full deck.:eek:You would be better off paying a few extra dollars for a decent kit.

Just get yourself some Ospho, put it in a Stainless Steel pot, heat it to about 180-190 degrees and drop the rusted parts in it. Instant parkerizing! :lol2:

I actually did this with some old black iron tools, they came out really nice, with a very hard black surface on the rusted surfaces. But I don't think it would work too good on gun parts!

[fal_762x51]

There is nothing wrong with the donkey dick grip.

[Gator Monroe]

Handguard penis:roflmao:

AK udder ?:nonono:

[Sidecarnutz]

Dont get me wrong guys .I have delt with Apex before and he runs an excellent outfit there . But I beleive if the topcover does not match then the kit is infact non matching . I can care less about the spring guide ,hammer ,trigger . . But infact a mismatched topcover would just ruin the whole aspect of building from matching number kits for me and destroy any resail value to a kit built rifle . Whats your thoughts guys???



I see "all matching" as important if you plan to put alot of work into a build. May as well go all out, right?

But for a custom project or just a range kicker rifle, if the bolt, carrier and front trunnion match I believe that is good enough.