FA-91 Compliance Parts

[Nu-B]

Does anyone know which compliance parts were used in the FA-91? I've seen lots of HK marked parts in mine.

[rpmfly2]

Welcome to the forum!!!
Does anyone know which compliance parts were used in the FA-91? I've seen lots of HK marked parts in mine.

The triggers are interchangeable and it depends on the trigger assemble and bolts if you got a G3 or a CETME! I have also only seen G3 parts built on the factory built ones but have seen CETME parts used from home brew builders at shows and forum adds!

[Lon Moer]

http://www.mwdg3.homestead.com/g3misc.html
On my first FA-91 the parts were
- receiver
- barrel
- hammer
- sear
- CIA stock, handguard, pg
this was an original FAC build, actually on a FA-PSG1 receiver.
My second, also on a FA-PSG1 receiver, was purchased as "incomplete" and only had
- receiver
- sear
- didn't have a hammer
and I don't know who put it together, but it was pretty rough.