US made Flash Hider

[SSwee]

US made flash hider - 15mm x 1mm threads, looks like the original pull offs
made of 4130 steel, in the white $55.00 each +shipping

[GearShanty]

Got mine in today. Looks really good. Swee, I sent you an email.

[hunter_la5]

mine came in today, and it looks fantastic. If any of you guys want to replace your CAI loudener brake with an authentic looking FH without messing with your compliance parts, SSwee is your man.

[weasel_master]

Got mine today. Looks great.

[Lon Moer]

I'll take one, if still available.
PM sent

[Lon Moer]

Got mine! :coolp:

[alhunter]

Finallly purchased one and just got on board with this site. Lots of good information. My cetme is on its way in from century. latest batch, black furniture. Is there any way to know if your flashhider will work. Supposedly it has the US made barrel. Been reading all the post of how to take the old one off but if its the US thread......
Any thoughts......
thanks.

[SSwee]

The majority have been threaded 15mmx1mm. There are some re threaded to 9/16"x? but I haven't recognized any rhyme or reason to the oddballs
SS

[rustypirate]

SSwee, the stock thread is 15mmX1mm RH, not 14X1.

[SSwee]

rustypirate
Thanks for catching my screw up. I had a brain fart at the time of typing.
SS

[SteelCore]

They look a bit thivker than the CETME one in the pic. is the outer diameter 22mm?

[hunter_la5]

They look a bit thivker than the CETME one in the pic. is the outer diameter 22mm?

the CETME bayo fits just fine on mine

[Longhorn789]

SSwee,

Are you flash hiders marked or stamped "US" in any way?

Thanks

[hunter_la5]

Are you flash hiders marked or stamped "US" in any way?

:smartass1: I can answer that one too! Mine was stamped "US" in small letters, as I assume they all are

[Enigma Nostra]

Mines also stamped US.

-E

[Longhorn789]

Sweet!

[kjkiss762]

US made flash hider - 15mm x 1mm threads, looks like the original pull offs
made of 4130 steel, in the white $55.00 each +shipping
PM sent.

[SSwee]

5 left of this batch.
SS

[ELEFANTMKVI (The Inbred clown)]

Are you going to be running another batch then? And if so how soon? Can use one this summer. Thanks, Mike.

[rpmfly2]

I got mine a while back and they are top notch quality!!!!:cheers:

[SSwee]

All depends on if they keep moving. If demand stays the same as it has been, I'll run another batch when I get down to a couple on hand. I always hate waiting on BO parts to ship and I figure most people are the same way.
Thanks to everyone that have purchased a FH.
Steve

[Otis61]

I just got 2 in the mail yesterday,and they are great. They look just like the pictures. I put my factory one, and one of SSwee's side by side, and they are practicly identicle. I'm very happy. If you need to boost your compliance parts up, its definetly worth it. You wont be disapointed.

[SSwee]

Bump, bump for the newbies.
SS

[SSwee]

Parkerizing tank set up finally if anyone would like one Manganese parkerized.
Color is a dark gey.
Also have Aluma-hyde II in matte and satin black.
SS

[rustypirate]

I cannot say enough about how cool these look.

You have done a terrific job there SSwee

[OrygunKid]

SSwee, I'm interested in 3 flash hiders. Sent you a P.M. --Dan

[SSwee]

New batch ready now on 4-20-08.
SS

[rifleman]

SSwee you are the man, the FH fits, Like a glove. good work. anyone looking for a good FH, look no further:rockon:

[cfish]

Hey SSwee what is the price on a pakerized FH? I"m looking for another cetme and when I find one will order another FH. I love the one I already bought.
Great Job sir!

[SSwee]

Fresh batch parked and ready to go plus for those that on occasion like to have a loudner for the range trip.
Price on the FH is still $55ea + $5 shipping
Price on the MB is $40ea + $5 shipping
Set of 1FH & 1MB $90 + $5 shipping
$5 off ea on orders of 3 or more.
Open to barters
Thanks to everyone
Steve Sweeney

[Schmitty]

I'll take one of them parkerized birdcage flash hiders. :thumbup:

PM sent.

[Schultz]

Hey Steve ya got a satin black FH made up? I kinda want to keep it the same color as the rest which i think is satin.

PM inbound too.

[Schultz]

Got mine today! Ya did an excellent job, Many thanks.:thumbup::thumbup::thumbup:

[Schmitty]

^I second that. Got mine today and it looks sweet. :airtight:

EDIT: I shot my Cetme here today with the new FH and the difference between this and the old MB isn't even comparable. With the MB, my hearing didn't get back to normal for 2 weeks, with the FH, it was back to 100% in a few minutes.

[SSwee]

Bump

[Snowman]

working on getting mine:icon_mrgreen:

[SSwee]

9-15-08 Still have FH & MB ready to ship for anyone that wants one.

Planning and snowman your customs are in process.

Get some. :icon_biggrin:

SS

[rifleman]

post pics of "the customs" i might have a secret project for ya.

[SSwee]

There are pics of the reverse FH and a modified FH in the cetme section done for Planning. The ones in process are similar to them but special threading for one. I'll post some new pics when they are done. If you want something special, PM or email me.
SS


http://www.militaryfirearm.com/Forum/showthread.php?t=7277&page=3

[rifleman]

so would it be possible

[SSwee]

New pics of a couple of customs. They look like the reversed FH made for Planning but have different threading for special apps.
SS

[rifleman]

lemme know if you have any project on the secret "silent" project.

[SSwee]

rifleman,
project is in process
SS

[rifleman]

SSweet.

[SSwee]

Bump
SS

[Planning]

cetme and the g3 flashhiders made by steve. they look great.
thanks.

[The Great 308]

Those look really nice! If you have any of your regular US made HK/Cetme birdcage style flashhiders left I will take one. I will send you a PM

Thanks :icon_biggrin:

[SSwee]

BTT
Still available.
SS

[SSwee]

Btt

[jekbrown]

hey SSwee, what kinds of things are you looking to get in trades? You have an awesome product, but I'm poor and trying to keep the cost of this rifle down. ;)

[SSwee]

AK, AR, cetme, G3 stuff. Not looking for anything in particular. If you have something, PM me and we'll work something out.
SS