SteelCore
03-27-2007, 03:50 PM
I just got my bayo lug and cleaning kit from Apex in CO, was 10bux, came with the little oil packs and the brush. After a little CLP to loosen up the spring, I was able to install it no prob on the CETME. Now I just need to find someone who's offloading those CETME bayos for cheep...last gunshow I went to , they wanted over 10bux fer one!
Also bought a bolt assebly carrier complete for a friend's ailing CETME, and it was brand spankin' new. I busted out the calipers, checked the new BH vs. my own BH --i've always suspected mine was not ground, and the calipers prove it. Also checked out the locking piece, and looks like mine isn't very worn either. Hopefuly these partw ill fix the ZERO bolt gap of his rifle.
Also bought a bolt assebly carrier complete for a friend's ailing CETME, and it was brand spankin' new. I busted out the calipers, checked the new BH vs. my own BH --i've always suspected mine was not ground, and the calipers prove it. Also checked out the locking piece, and looks like mine isn't very worn either. Hopefuly these partw ill fix the ZERO bolt gap of his rifle.