Page 1 of 3 123 LastLast
Results 1 to 10 of 22

Thread: Where to get US made parts for CETME C

  1. #1
    New Recruit
    Join Date
    Apr 2018
    Location
    Valley, NE
    Posts
    11
    Rep Power
    9

    Where to get US made parts for CETME C

    Just starting to look at doing a CETME C kit build. I have been looking for places to get 922r parts. Lots of good stuff out there but most of it is original Spanish surplus. Any information is appreciated.
    Thanks

  2. #2
    WildBillCody's Avatar
    Join Date
    Mar 2007
    Location
    West Milford, WV
    Posts
    3,820
    Rep Power
    342
    Remember a lot of G3 parts can be used.

    https://www.hkparts.net/shop/pc/HK-9...-922r-c234.htm
    I love you guys...

  3. #3
    Senior Veteran

    Join Date
    Dec 2007
    Location
    New Mexico
    Posts
    3,753
    Rep Power
    472
    The easiest is to use a G3 FCG & lower, 922r parts are readily available for that.

    IFG makes a cetme flash hider still: http://www.investmentgradefirearms.c...e-attachments/

    I don't know if TurboThis is still around (search for either his handle or website - mygunsnorthwest) but he used to make cetme FCG parts. His site isn't loading for me, but then I'm at work and you never can tell what will be blocked around here.

    Blackwing (username here on the forum) makes some G3 922r parts, it might be worth asking him about cetme parts too.

    I still make (when I have time that is) a beech pistol grip that can be stained to match the Spanish poplar stocks (they vary a lot in color) or a walnut one that is usually a good match for a well used, darker Spanish stock. RTG parts sells them for me, and unfortunately I'm way behind on all the stuff for Robert - I send a box of grips and they sell in about 5 minutes since they are all backordered. But click his "email me" button and you'll get one eventually.

  4. #4
    New Recruit
    Join Date
    Apr 2018
    Location
    Valley, NE
    Posts
    11
    Rep Power
    9
    Thanks gents, just what I was looking for. Started working on my list now that I know what is available.

  5. #5
    New Recruit
    Join Date
    Apr 2018
    Location
    Valley, NE
    Posts
    11
    Rep Power
    9
    Quote Originally Posted by WildBillCody View Post
    Remember a lot of G3 parts can be used.

    https://www.hkparts.net/shop/pc/HK-9...-922r-c234.htm
    Thanks for the tip. Great place to do business with. I had to make up my mind about how to go on this build. I am not going to do it any time soon and wanted to get the parts together along with the kit for down the road while this stuff is still available. Who knows what will be banned next these days.
    I decided to go with a US made trigger pack and the G3 SEF type lower housing for convenience sake and the four compliance parts. Not as issued but handy. I am thinking that down the road I can convert the original FCG and sub in a US mag and charging handle for the 922r points lost with taking off the G3 set up if I want a more correct appearance. Not a big issue at this point for me. The other three compliance parts are the rec ( I will be using a PTR semi unit.), US made barrel and US muzzle break.
    Right now I am finishing up a Polish DPM semi auto converted LMG. Its done and shooting but I am still working on the semi conversion as its been prone to not resetting the trigger reliably. I will be doing another DPM when this one is done and have now gotten a couple of kits to stash away for next year. In the mean time I have been reading up on the CETME here on the list. Great information and a lot to take in.

  6. #6
    New Recruit
    Join Date
    Jun 2016
    Location
    West Central FL
    Posts
    20
    Rep Power
    31
    Quote Originally Posted by jdowney View Post
    The easiest is to use a G3 FCG & lower, 922r parts are readily available for that.

    IFG makes a cetme flash hider still: http://www.investmentgradefirearms.c...e-attachments/
    Well crap, I have the Sarco barrels and they are not threaded in the metric size, they are a common US size, forget the specifics....

  7. #7
    New Recruit
    Join Date
    Jun 2016
    Location
    West Central FL
    Posts
    20
    Rep Power
    31
    Quote Originally Posted by MotoG5 View Post
    US ... charging handle for the 922r points
    Where can I get a US made charging handle for the CETME C?

  8. #8
    Senior Veteran

    Join Date
    Dec 2007
    Location
    New Mexico
    Posts
    3,753
    Rep Power
    472
    Quote Originally Posted by cthulhudarren View Post
    Where can I get a US made charging handle for the CETME C?
    You can use a PTR made one, the cocking handle interchanges between a cetme and hk 91.

  9. #9
    holescreek's Avatar
    Join Date
    Oct 2009
    Location
    Centerville, OH
    Posts
    4,351
    Rep Power
    405
    Quote Originally Posted by cthulhudarren View Post
    Well crap, I have the Sarco barrels and they are not threaded in the metric size, they are a common US size, forget the specifics....
    Then any .308 flash hider should work.

  10. #10
    Senior Veteran
    scottz63's Avatar
    Join Date
    Apr 2014
    Location
    Central Mo.
    Posts
    3,299
    Rep Power
    235
    Quote Originally Posted by cthulhudarren View Post
    Well crap, I have the Sarco barrels and they are not threaded in the metric size, they are a common US size, forget the specifics....
    Most likely 5/8-24, that's what the newer PTR's have anyways.

    There are a few of that thread size at the bottom here.

    https://www.hkparts.net/shop/pc/HK-9...rakes-c121.htm
    14EH AIT Instructor-PATRIOT Fire Control Enhanced Operator/Maintainer

Similar Threads

  1. U.S. MADE CETME L Parts ?
    By gorbr103 in forum Cetme/HK
    Replies: 1
    Last Post: 08-24-2016, 09:24 PM
  2. US made cetme parts
    By cfish in forum Want to Buy
    Replies: 6
    Last Post: 09-04-2008, 09:06 PM
  3. WTK U.S. made compliant cetme parts?
    By rapid fire in forum Cetme/HK
    Replies: 1
    Last Post: 08-28-2008, 03:02 PM
  4. WTS US Made Cetme Parts - Jestism
    By jestism in forum For Sale
    Replies: 25
    Last Post: 04-17-2008, 12:47 AM
  5. WTS a few more CETME and G3 parts, Some US made
    By ELEFANTMKVI (The Inbred clown) in forum For Sale
    Replies: 5
    Last Post: 12-12-2007, 01:30 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •