Page 2 of 2 FirstFirst 12
Results 11 to 19 of 19

Thread: CETME mag loader cheap

  1. #11
    Senior Veteran The War Wagon's Avatar
    Join Date
    May 2009
    Location
    sw PA
    Posts
    523
    Rep Power
    173
    Quote Originally Posted by Ghoulardi View Post
    you bought 3 loaders for 3 different mags?? and still have to fiddle with a lever to load them in one at a time.
    I didn't buy ANY of them; I's jes' pointin' 'em out.

    Never owned a loader, until I got an AR lula as part of a trade several years ago. As I own over 400 AR mags (I stopped counting after 300, but kept on buyin' 'em), and loaded at LEAST half of 'em with it, I have no complaints about a lula. Never have gotten around to getting another in a different caliber though.
    We have no government armed with power capable of contending with human passions unbridled by morality and religion. Avarice, ambition, revenge or gallantry would break the strongest cords of our Constitution as a whale goes through a net. Our Constitution is designed only for a moral and religious people. It is wholly inadequate for any other. - John Adams, 2nd U.S. President -

  2. #12
    Senior Veteran Ghoulardi's Avatar
    Join Date
    Aug 2011
    Location
    PARMA!!
    Posts
    627
    Rep Power
    232
    and for you guys that have 5.56 AKs, here is one you can make for yourself that's a bit simplier. take a REAL BETA CO. SPEED LOADER, cut a slot for the rear locking tab, cut our the front of the base and use a small strap of alumium to extend the front, then thin the inside of the base and square up the inside of it, so it goes over the AK mag and sits in there flush and close to the stripper clip "ledge", and now you got a stripper loader for your 5.56 AK magazine

    Last edited by Ghoulardi; 05-19-2020 at 08:56 PM.
    STAY SICK! AND TURN BLUE OVA-DEY!

  3. #13
    Super Moderator rustypirate's Avatar
    Join Date
    Oct 2008
    Location
    Tampa Bay, Florida
    Posts
    1,380
    Rep Power
    266
    Guys,
    These loaders are the business.
    No stripper clips needed.
    Just lay the rounds in a row and close the lid, and ZIP all done.
    They also work flawlessly with FAL mags.
    I already had one and for this price I just bought a second.
    get 'em while they are around, just sayin'
    Some people are like a slinky...

    Not really good for anything, but fun to push down the stairs.

  4. #14
    Senior Veteran sdk1968's Avatar
    Join Date
    Feb 2008
    Posts
    3,247
    Rep Power
    372
    so you have to load a mag loader to load a mag?

    that just seems like extra work?


    or maybe you guys just have a shitload more mags to load?


    got lula mag loaders for ar's & ak's... but you dont load them to load them, its more of a direct operation.
    say what you mean & mean what you say!
    TEC Tactical=SOT/07 i work there.

  5. #15
    Senior Veteran
    The German's Avatar
    Join Date
    Nov 2012
    Location
    Cincinnati, OH
    Posts
    341
    Rep Power
    142
    If you have access to a 3D printer, here are the print files for some of my loaders for AR15, AR10, Cetme: https://primercatcher.com/3df/
    NRA Life member, Instructor and CRSO
    www.primercatcher.com

  6. #16
    Senior Veteran sdk1968's Avatar
    Join Date
    Feb 2008
    Posts
    3,247
    Rep Power
    372
    Quote Originally Posted by The German View Post
    If you have access to a 3D printer, here are the print files for some of my loaders for AR15, AR10, Cetme: https://primercatcher.com/3df/
    oh hell yes. thank you very much.

    files grabbed.
    say what you mean & mean what you say!
    TEC Tactical=SOT/07 i work there.

  7. #17
    Senior Veteran
    The German's Avatar
    Join Date
    Nov 2012
    Location
    Cincinnati, OH
    Posts
    341
    Rep Power
    142
    If you print them with a high infill, they are almost unbreakable... the pusher at 70%+ will do. Takes a little bit practice to drop the ammo in the right way, but for sure beats loading them manually :-)

    Quote Originally Posted by sdk1968 View Post
    oh hell yes. thank you very much.

    files grabbed.
    NRA Life member, Instructor and CRSO
    www.primercatcher.com

  8. #18
    Senior Veteran sdk1968's Avatar
    Join Date
    Feb 2008
    Posts
    3,247
    Rep Power
    372
    ^^ are you printing with PLA? or +?

    Tony has been printing most of his stuff with the PLA w/carbon fiber. its been coming out pretty strong... but i dont know what infill he is running.
    say what you mean & mean what you say!
    TEC Tactical=SOT/07 i work there.

  9. #19
    Senior Veteran
    The German's Avatar
    Join Date
    Nov 2012
    Location
    Cincinnati, OH
    Posts
    341
    Rep Power
    142
    I make everything in cheap PLA - with a high infill it is almost indestructible. I have found no real need for anything else besides some flexible filament.
    NRA Life member, Instructor and CRSO
    www.primercatcher.com

Similar Threads

  1. WTS CETME Mag loader
    By WildBillCody in forum For Sale
    Replies: 2
    Last Post: 09-22-2010, 09:09 PM
  2. Cetme Mag Loader
    By FullAssault in forum Cetme/HK
    Replies: 19
    Last Post: 02-20-2010, 10:04 PM
  3. Wts/t original benchtop cetme/g3 mag loader
    By security leak in forum For Sale
    Replies: 0
    Last Post: 01-22-2010, 01:08 PM
  4. Cetme/G3/FAL Mag Loader
    By Milsurp in forum Non Forum Deals
    Replies: 12
    Last Post: 12-12-2009, 04:00 PM
  5. CETME magazine loader
    By bigbear77 in forum Non Forum Deals
    Replies: 8
    Last Post: 11-05-2008, 09:08 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •