Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: For those looking for barrels

  1. #1

    Join Date
    Jun 2010
    Location
    SW Washington state
    Posts
    1,713
    Rep Power
    164

    For those looking for barrels

    I have been doing some scouring of the net looking for barrels and such, have any of you heard of these? https://www.cogunsales.com/index.php...uct-flyer.html

    Any luck with them?
    "Laws that forbid the carrying of arms disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than to prevent homicides, for an unarmed man may be attacked with greater confidence than an armed man."
    Thomas Jefferson


  2. #2

    Join Date
    Mar 2009
    Location
    Arkansas. up in the Northwest corner that is home of WalMart, Tyson Foods, and J.B.Hunt.
    Posts
    3,064
    Rep Power
    349
    I think they've been around a while. I don't have any buying experience with them, cause everything they have had that I was looking for, seemed to be over-priced. ymmv
    Time for the book "The Decline and Fall of the United States of America?"

  3. #3

    Join Date
    Jun 2010
    Location
    SW Washington state
    Posts
    1,713
    Rep Power
    164
    Quote Originally Posted by mitchstoner View Post
    I think they've been around a while. I don't have any buying experience with them, cause everything they have had that I was looking for, seemed to be over-priced. ymmv
    I agree, I have never purchased anything either from them but I started following them a bit when I bought my first k31, the tend to sell stuff that not everyone sells.
    But that being said if this barrel is the one they are selling and its not just another FAL barrel these would be Belgian and are actually not a bad price.."if" it's the one in the picture.
    "Laws that forbid the carrying of arms disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than to prevent homicides, for an unarmed man may be attacked with greater confidence than an armed man."
    Thomas Jefferson


  4. #4
    jerrymrc's Avatar
    Join Date
    Oct 2007
    Location
    colorado Springs
    Posts
    462
    Rep Power
    176
    That may be an early Argy barrel not a G1. The position of the lug and size and the fact that it is NOT bipod cut tell me that it may be an argy. If the gas block was still there it would be open ear I bet. If you do not need the bipod cut then it would be fine.

  5. #5
    Senior Veteran automick's Avatar
    Join Date
    Feb 2009
    Location
    Port Charlotte FL
    Posts
    1,704
    Rep Power
    302
    Buddymack....if your looking for a barrel for the apex g1 kit.
    i think you want it bypod cut.!
    if so...the barrel i got from sarco....argentine..brand new...chrome lined.
    jumped at me. a little pricey...but they aint importing any more.
    You will have to modify the g1 flash hider to fit it. and pin it.
    An original g1 barrel...if you can find one...$300.
    Im waiting for the suposed apex bipod barrels to arrive. and see the price.
    In the mean time...being impatient...and wanting to build one of the kits.
    i went argy.!
    atb...auto.
    If its to bright....call ELLIOT LUCAS.!

  6. #6
    Senior Veteran rpmfly2's Avatar
    Join Date
    Mar 2007
    Location
    Des Moines, Iowa
    Posts
    1,957
    Rep Power
    277

    I have bought kits

    and other parts from them! Good kits and parts so I would buy from them again! Don't know anything about these barrels though.
    We have never needed any new laws to govern decent law abiding citizens!

    Just to enforce the old laws on the NEW ARRIVALS!

  7. #7
    Senior Veteran
    jbruney's Avatar
    Join Date
    Mar 2007
    Location
    South Texas
    Posts
    3,635
    Rep Power
    380
    I bought something from them about two years ago ,but have no recollection of what it was. I do recall they shipped quickly and it was as advertised....Geez! My memory slips more and more each day.
    Joe
    COG#1453

  8. #8
    Senior Veteran bladeworks123's Avatar
    Join Date
    Jan 2008
    Location
    Colorado - Out West
    Posts
    6,569
    Rep Power
    332
    DSA has new barrels at $250.00. Have bought 3 now and have had good luck with them.
    BATTLEMENT ARMS
    www.battlementarms.com

  9. #9

    Join Date
    Jun 2010
    Location
    SW Washington state
    Posts
    1,713
    Rep Power
    164
    Quote Originally Posted by automick View Post
    Buddymack....if your looking for a barrel for the apex g1 kit.
    i think you want it bypod cut.!
    if so...the barrel i got from sarco....argentine..brand new...chrome lined.
    jumped at me. a little pricey...but they aint importing any more.
    You will have to modify the g1 flash hider to fit it. and pin it.
    An original g1 barrel...if you can find one...$300.
    Im waiting for the suposed apex bipod barrels to arrive. and see the price.
    In the mean time...being impatient...and wanting to build one of the kits.
    i went argy.!
    atb...auto.
    You know that is a good idea, I already have one Belgian barrel to employ one of the flash hiders it would probably be nice to have one that is chrome lined for wear and tear and such, plus I could put on a break instead of a FH.
    "Laws that forbid the carrying of arms disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than to prevent homicides, for an unarmed man may be attacked with greater confidence than an armed man."
    Thomas Jefferson


  10. #10
    New Recruit
    Join Date
    Apr 2007
    Posts
    21
    Rep Power
    175
    Sarco did have Argy fal barrels,haven't check lately.
    moondog55

Similar Threads

  1. barrels
    By bhound in forum Cetme/HK Building Resources
    Replies: 0
    Last Post: 02-05-2011, 07:09 PM
  2. Used AK Barrels $13.99 or $9.99 for 5 or more
    By M1 Tanker in forum Non Forum Deals
    Replies: 3
    Last Post: 09-26-2010, 05:14 PM
  3. 6.8 barrels
    By HKILLER in forum AR-15
    Replies: 2
    Last Post: 09-22-2010, 01:58 PM
  4. where are the barrels?
    By turbothis in forum Build it Yourself/Gunsmithing
    Replies: 10
    Last Post: 05-11-2008, 09:06 AM
  5. barrels
    By Otis61 in forum Build it Yourself/Gunsmithing
    Replies: 3
    Last Post: 08-05-2007, 01:39 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •